Cart 2 india

Specification
Brand : CS Unitec
BulletPoint1 : Cnc precision ground for fast penetration, accuracy and long life
BulletPoint2 : Flutes run the length of the cutter for efficient chip clearance, increased drilling productivity and decreased cutter breakage
BulletPoint3 : Drill holes 3 times faster than twist drills
BulletPoint4 : Produce reamed-quality burr-free holes and solid slugs
BulletPoint5 : Made in Germany
CuttingAngleString : 90 degrees
ExternallyAssignedProductIdentifier1 : 792966783850
ExternallyAssignedProductIdentifier2 : 0792966783850
FinishType : Uncoated
GpsrSafetyAttestation : 1
IncludedComponents : Annular Cutter & Pilot Pin
ItemName : CS Unitec 2-11/16" x 1" Unibroach (HSS) Annular Cutter with Pilot Pin (6-1-186)
ItemPackageDimensions_Height : 6 inches
ItemPackageDimensions_Length : 6 inches
ItemPackageDimensions_Width : 6 inches
ItemPackageQuantity : 1
ItemTypeKeyword : annular-cutters
Manufacturer : CS Unitec
Material : High Speed Steel
MfgSeriesNumber : 6-Series
ModelName : Wisoqumx3ewntp64
ModelNumber : Kuuleynz4onk85qyr
NumberOfFlutes : 2
NumberOfItems : 1
PackageLevel : unit
PartNumber : 6-1-186
ProductDescription :

Specifications
Cutting Diameter:  11/16"
Cutting Depth:2"
Shank Diameter: 3/4"
Shank Style:Weldon Flat
Number of Flats: 2
Material:High Speed Steel（HSS）
Finish/Coating: Bright
Treatment:all-ground
Accessory:with 1 pilot pin(6.34*103mm）
Packing:plastic box
Fits:Hole processing field such as engineering, rail transit, bridges, ships,machinery manufacturing, aerospace. Mild & Structural Steel; Aluminum;Stainless Steel (lower BHN)

Application
1. Insert the ejector pin inside the annular cutter.Fill the coolant tank with oil lubrication,never use the machine without lubricant.
2.Requirement to cutting rotate speed of annular cutter are also different for different diameters,and reasonable cutting rotate speed will prolong service life of annular cutter directly,So we recommend:1.The cutting speed:VC=20-25m/min 2.The reasonable rotate feed amount shall be fn=0.08-0.13mm/r 3.The reasonable feed rate shall be vf=36-60mm/min
3.Annular Cutter offers superior holemaking capabilities. It cut faster, last longer, produces a better hole finish, a true round hole with very tight tolerances, can be re-sharpened and drills holes with less power and torque.
4.The cutter is used for drilling through steel. They produce accurate burr-free holes to close tolerances without pre-drilling or step drilling. They can drill a much larger hole and requires less force and time than a standard twist drill bit.

Warm Tip
Protect your eyes and belongings away from the drilling cutter.

ProductSiteLaunchDate : 2022-06-25T11:47:12.431Z
Size : 2-11/16" x 1"
Style : ACHSS-1P-7_16x1&ACHSS-2P-7_16x1
SupplierDeclaredDgHzRegulation : not_applicable
SurfaceRecommendation : HSS
SurfaceRecommendation1 : Metal
SurfaceRecommendation2 : Wood
SurfaceRecommendation3 : Plastic
UnitCount : 1
UnspscCode : 27110000