Cart 2 india

Specification
Brand : Accusize Industrial Tools
BulletPoint1 : 3/4 inch Cutting Diameter; 3/4" Weldon Shank; 2 inch Cutting Depth
BulletPoint2 : Cuts holes in steel accurately, quickly & safely. Large holes can be drilled up to ten times faster than regular drills bits
BulletPoint3 : Make overlapping holes, slotting holes and edge cuts. American Standard
BulletPoint4 : Made from tough, high-speed tool steel - more durable than carbide-tipped cutters
BulletPoint5 : Machine-finish hole-no reaming needed when used with lubricant
ExternallyAssignedProductIdentifier1 : 641799802521
ExternallyAssignedProductIdentifier2 : 0641799802521
FinishType : Brass
GpsrSafetyAttestation : 1
ItemName : Accusize Industrial Tools 3/4'' Cutting Dia, 3/4'' Weldon Shank, 2'' Cutting Depth H.S.S. Annular Cutters, 2081-2017
ItemPackageDimensions_Height : 10 centimeters
ItemPackageDimensions_Length : 5 centimeters
ItemPackageDimensions_Width : 5 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : annular-cutters
Manufacturer : Accusize Co.,Ltd.
Material : HSS
Material1 : Carbide
Material2 : Alloy Steel
ModelNumber : 2081-2017
NumberOfFlutes : 2
NumberOfItems : 1
NumberOfPieces : 1
PartNumber : 2081-2017
ProductDescription :

Specs

• Cutting Diameter: 1-1/4''
• Cutting Depth:1'' 
• Shank Diameter: 3/4''
• Shank Style:Weldon Flat
• Number of Flats: 2
• Material:High Speed Steel（HSS）
• Finish/Coating:Bright
• Fits:Hole processing field such as engineering, rail transit, bridges, ships,machinery manufacturing, aerospace. Mild & Structural Steel; Aluminum;Stainless Steel (lower BHN)

Application

The cutter is used for drilling through steel. They produce accurate burr-free holes to close tolerances without pre-drilling or step drilling. They can drill a much larger hole and requires less force and time than a standard twist drill bit.

The annular Cutter offers superior holemaking capabilities. It cut faster, last longer, produces a better hole finish, a true round hole with very tight tolerances, can be re-sharpened and drills holes with less power and torque.

Requirement to cutting rotate speed of annular cutter are also different for different diameters,and reasonable cutting rotate speed will prolong service life of annular cutter directly,So we recommend:1.The cutting speed:VC=20-25m/min 2.The reasonable rotate feed amount shall be fn=0.08-0.13mm/r 3.The reasonable feed rate shall be vf=36-60mm/min 

Notes

What Causes Dull or Broken Cutters?

The primary cause of broken or prematurely dull cutters is a feed rate that is too slow. Slow feed rates will reduce the life of your cutter. Using a firm, steady feed pressure throughout the cut will maximize performance and extend tool life.

Second reason why cutters break is movement of the drill or work piece. The cutter wall can easily be snapped if the drill and material is not held rigid.

ProductSiteLaunchDate : 2014-11-04T19:43:23.322Z
Size : 3/4'' Cutting Dia; 3/4" Weldon Shank
SupplierDeclaredDgHzRegulation : not_applicable
SurfaceRecommendation : Wood,Stainless Steel,Aluminum,Cast Iron,Steel,Brass
UnitCount : 1
UnspscCode : 27112700