Cart 2 india

Specification
Brand : uxcell
BulletPoint : Angular Contact Bearings 7203AC/P5 1 PCS 17mm X 40mm X 12mm P5 ABEC-5 Precision Bearings
BulletPoint1 : 7001AC (I.D.: 12mm, O.D.: 28mm, Width: 8mm)
BulletPoint2 : 7001AC bearings are open type for easy lubricating
BulletPoint3 : Chromium Steel long-life bearings, smooth and low noise
BulletPoint4 : ABEC Tolerance 1 (P0), Z1 Noise Level for most general use
BulletPoint5 : Static load rating of 5400 newtons and dynamic load rating of 2750 newtons
Color : Silver
ExternallyAssignedProductIdentifier1 : 0614070102993
ExternallyAssignedProductIdentifier2 : 614070102993
ItemName : uxcell 7001AC Angular Contact Ball Bearing 12x28x8mm, Single Row, Open, 25° Contact Angle 2pcs
ItemPackageDimensions_Height : 13.4 centimeters
ItemPackageDimensions_Length : 1.8 centimeters
ItemPackageDimensions_Width : 9.7 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : angular-contact-bearings
Manufacturer : uxcell
Material : Steel
ModelNumber : 19GS035
NumberOfItems : 2
PartNumber : a19031400ux0729
ProductDescription : Description:

Single-row, pre-lubricated, normal accuracy.
Single row angular contact ball bearings are designed to accommodate loads in one direction only.
This type of bearing is typically adjusted against a second bearing.
Their bearing rings have an upper and a lower shoulder and are non-separable.
Chromium Steel (GCr15) made with heat treating, provides high and uniform hardness, good wear resistance.
Suitable for use in commercial and industrial applications including pumps and compressors, gearboxes, and printing machines, among others.



Specification:
Model: 7001AC
Type: Open Type
Inner Race/Outer Race Material: Chrome Steel (GCr15)
Cage Material: Nylon
Inner Diameter (d): 12mm
Outer Diameter (D): 28mm
Thickness (B): 8mm
Dynamic Load Rating (Cr): 5.4kN
Static Load Rating (Cor): 2.75kN
Contact Angle: 25°
Accuracy Class: P0 (ABEC-1)
Noise Level: Z1
Number of Pack: 2 Pcs

ProductSiteLaunchDate : 2019-05-14T07:30:35.896Z
Size : 12x28x8mm
SpecificationMet : Iso
SupplierDeclaredDgHzRegulation : not_applicable