Cart 2 india

Specification
Brand : SKF
BulletPoint1 : Single-row angular contact ball bearing with light preload for universal matching, supporting moderate to heavy one-directional thrust loads, and combined loads where thrust load is predominant
BulletPoint2 : Ball contact angle of 40 degrees relative to the inner and outer raceways increases thrust load capacity
BulletPoint3 : Open configuration for lubrication applied in place
BulletPoint4 : Brass cage evenly spaces balls for reduced friction, vibration, and noise
BulletPoint5 : ABEC 1 tolerance ratings for accuracy and low rotational speeds
ExternallyAssignedProductIdentifier : 9175565836942
ExternallyAssignedProductIdentifier1 : 7316577611284
ExternallyAssignedProductIdentifier2 : 07316577611284
ItemName : SKF 7310 BEGAM Medium Series Angular Contact Bearing, Light Preload, ABEC 1 Precision, 40° Contact Angle, Open, Brass Cage, Normal Clearance, 50mm Bore, 110mm OD, 27mm Width, 51000lbf Static Load Capacity, 74100lbf Dynamic Load Capacity
ItemPackageDimensions_Height : 4.7 centimeters
ItemPackageDimensions_Length : 13 centimeters
ItemPackageDimensions_Width : 13 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : angular-contact-bearings
Manufacturer : SKF
Material : Steel
ModelNumber : 7310 BEGAM
NumberOfItems : 1
PartNumber : 7310 BEGAM
ProductDescription : 7308 Nachi Angular Ball Bearing 40 Contact Angle Steel Cage 40mm x 90mm x 23mm Made in Japan 7308 Nachi Angular Ball Bearing, bearing is 40 Contact Angle, Steel Cage and Flush Ground, Made in Japan, inner diameter is 40mm, outer diameter is 90mm and width is 23mm. * Item: 7308 Angular Ball Bearing * Type: Nachi Angular Ball Bearing * Cage: Steel Cage * Dimensions: 40mm x 90mm x 23mm/Metric * ID (inner diameter)/Bore: 40mm * OD (outer diameter D1): 90mm * Width/Height/thickness: 23mm * Size: 40 x 90 x 23 mm * Quantity: One Bearing * Dynamic load rating Cr: 49,000 N * Static load rating Cor: 33,000 N * Limiting Speed: * Grease Lubrication: 7,000 RPM * Oil Lubrication: 9,200 RPM * Made in Japan Nachi Single Row Angular Contact Bearing The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.
ProductSiteLaunchDate : 2012-07-15T00:00:01-00:00
SpecificationMet : Iso
UnitCount : 1
UnspscCode : 31171531