Cart 2 india

Specification
Brand : Nachi
BulletPoint1 : Item: 7011CYP4 Angular Ball Bearing
BulletPoint2 : Type: Nachi Angular Ball Bearing
BulletPoint3 : Cage: Polyamide resin cage
BulletPoint4 : Quality: ABEC-7 (P4 quality)
BulletPoint5 : Dimensions: 55mm x 90mm x 18mm/Metric
ExternallyAssignedProductIdentifier1 : 7316571185514
ExternallyAssignedProductIdentifier2 : 07316571185514
ExternallyAssignedProductIdentifier3 : 00605779488822
IncludedComponents : Bearing
ItemDisplayWeight : 1.11 pounds
ItemName : 7011CYP4 Nachi Angular Contact Bearing 55x90x18 Abec-7 Japan Ball
ItemPackageDimensions_Height : 5.5 centimeters
ItemPackageDimensions_Length : 10 centimeters
ItemPackageDimensions_Width : 10 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : angular-contact-bearings
Manufacturer : Nachi
Material : Metal
Material1 : steel
Material2 : resin
ModelNumber : 3307 A
NumberOfItems : 1
PackageLevel : unit
PartNumber : Kit10836
ProductDescription : High Precision Ball Bearing 7011CYP4 Nachi Angular Ball Bearing 15 degrees Contact Angle Abec-7 55mm x 90mm x 18mm Made in Japan 7011CYP4 Nachi high precision Angular Ball Bearing with 15 degrees contact angle and Polyamide resin cage, bearing is ABEC-7 (P4) quality and made in Japan. the 7011CYP4 inner diameter is 55mm, the 7011CYP4 outer diameter is 90mm, 7011CYP4 width is 18mm. * Item: 7011CYP4 Angular Ball Bearing * Type: Nachi Angular Ball Bearing * Cage: Polyamide resin cage * Quality: ABEC-7 (P4 quality) * Dimensions: 55mm x 90mm x 18mm/Metric * ID (inner diameter)/Bore: 55mm * OD (outer diameter): 90mm * Width/Height/thickness: 18mm * Size: 55 x 90 x 18 mm * Quantity: One Bearing * Dynamic load rating Cr: 34,500 N * Static load rating Cor: 28,800 N * Limiting Speed: * Grease Lubrication: 11,000 RPM * Oil Lubrication: 15,000 RPM * Made in Japan Dimensions d D B r r1 a 55mm 90mm 18mm 1.1mm 0.6mm -0.6mm Nachi Single Row Angular Contact Bearing The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When
ProductSiteLaunchDate : 2010-09-30T17:28:09.486Z
StreetDate : 2016-07-01T00:00:01Z
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1