Cart 2 india

Specification
Brand : BAOSHISHAN
BulletPoint1 : [DOUBLE GROOVES] -- We have 7 kinds of doubel groove grindometer: 0-15μm and 0-25μm ( index value is 2.5μm), 0-50μm ( index value is 5μm), 0-100μm ( index value is 10μm), 0-150μm and 0-200μm and 0-300μm ( index value is 15μm). The fineness meter is made of forged stainless steel with a sloping groove. Scale in microns (μm), the accuracy of fineness plate grooves ± 1μm.
BulletPoint2 : [USING & READING] -- Put some particles on the deeper groove, then use scraper to scrape them from deeper to low groove. Immediately (not over 5 seconds) observe the tick mark of grain visible in the channel, this numerical value is the fineness.
BulletPoint3 : [READING UNIT: μm/MIL] -- Correspondence between micron (μm) and mil (MILS) as follows: 1 mil = 25.4 um. Model 15μm/150μm/200μm/300μm with reading unit μm, Model 25μm/50μm/100μm with reading unit μm/MIL
BulletPoint4 : [HOW TO CHOOSE GRINDOMETER] -- Choose a fineness gauge 5-10um higher than the product fineness range you measured. Single groove means only one scraper groove, double grooves refer to two scraping grooves, which are convenient for comparison.
BulletPoint5 : [NOT ONLY FOR PAINT] -- BAOSHISHAN paint grind gauge can measure not only the fineness of paint, but also the fineness of coatings, pigments, raw materials, plastics, printing ink and so on. In chocolate, ceramics, paper, medicine, food and other industries, it is also possible to use the gauge for fineness detection.
Color : Black
ExternallyAssignedProductIdentifier : 7038475078302
ExternallyAssignedProductIdentifier1 : 663566033327
ExternallyAssignedProductIdentifier2 : 0663566033327
IncludedComponents : Scraper
ItemDisplayWeight : 1.4 kilograms
ItemName : BAOSHISHAN 0-200um Double Groove Grindometer Fineness of Grind Gauge ISO Standard Dual Channel with 1 Scraper, Unit um, Storage Case (JL-200um)
ItemPackageDimensions_Height : 9 centimeters
ItemPackageDimensions_Length : 31 centimeters
ItemPackageDimensions_Width : 24 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : angle-gauges
Manufacturer : BAOSHISHAN
Material : stainless_steel
MeasurementAccuracy : +/- 1um
ModelName : Schimer15xdu3awmv
ModelNumber : 3602-5025x6
NumberOfItems : 1
PackageLevel : case
PartNumber : WLS-367
ProductDescription : STANDARDS: ASTM D 333, D 1210, D 1316; ISO 1524; FTMS 141a. Many types of solid materials must be ground or milled into finer particles for dispersion in appropriate liquid vehicles. The physical properties of the resulting dispersions, often called ‘grinds’ , depend not only on the actual size of the individual particles, but also on the degree to which they are dispersed. The Fineness of Grind Gage is used to indicate the fineness of grind or the presence of coarse particles or agglomerates in a dispersion. It does not determine particle size or particle size distribution. Grind gages are used in controlling the production, storage and application of dispersion products produced by milling in the paint, plastic pigment, printing ink, paper, ceramic, pharmaceutical, food and many other industries. The Fineness of Grind Gage is a flat steel block in the surface of which are two flat-bottomed grooves varying uniformly in depth from a maximum at one end of the block to zero near the other end. Groove depth is graduated on the block according to one or more scales used for measuring particle size. Correspondence between micron, mil and Hagemeyer as follows: 1 mil = 25.4 um, 1 um = 0.001 mm, 0 Hegman = 4 mil / 100 um, 4 Hegman = 2 mil / 50 um, 8 Hegman = 0 mil / 0 um, *Hagemeyer (Hegman) is usually represented by a capital "H".
ProductSiteLaunchDate : 2023-07-06T10:39:15.154Z
Size : Case of 6
Style : JL-200um
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 27000000