Cart 2 india

Specification
Brand : US Galvanized
BulletPoint1 : Hot Dipped Galvanized
BulletPoint2 : Lightweight and compact design make easy to retrieve
BulletPoint3 : Hinged stocks for easy orientation
ExternallyAssignedProductIdentifier : 4012785330858
ExternallyAssignedProductIdentifier1 : 850009436214
ExternallyAssignedProductIdentifier2 : 0850009436214
GpsrSafetyAttestation : 1
ImportDesignation : Imported
ItemName : US Galvanized Fluke Anchor 4lbs (2kg)
ItemPackageDimensions_Height : 43.18 centimeters
ItemPackageDimensions_Length : 7.62 centimeters
ItemPackageDimensions_Width : 16.4084 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : boating-anchors
Manufacturer : US Galvanized
ModelNumber : USGH35040
NumberOfBoxes : 1
PartNumber : USGH35040
ProductDescription : This is for one (1) quality galvanized (AISI 316) 4lb (2kg) Fluke Anchor. Not to be used for overhead lifting. American Richard Danforth invented the Danforth pattern in the 1940s for use aboard landing craft. It uses a stock at the crown to which two large flat triangular flukes are attached. The stock is hinged so the flukes can orient toward the bottom. Tripping palms at the crown act to tip the flukes into the seabed. The design is a burying variety, and once well set can develop high resistance. Its lightweight and compact flat design make it easy to retrieve and relatively easy to store; some anchor rollers and hawse pipes can accommodate a fluke-style anchor. A Danforth will not usually penetrate or hold in gravel or weeds. In boulders and coral it may hold by acting as a hook. If there is much current, or if the vessel is moving while dropping the anchor, it may "kite" or "skate" over the bottom due to the large fluke area acting as a sail or wing.
ProductSiteLaunchDate : 2019-11-20T20:35:08.630Z
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 49131500