Cart 2 india

Specification
Brand : Respicefinem
BulletPoint1 : Using Organic Silicone Potting, It Is, And Shockproof, Suitable For Use In Various Harsh Environments
BulletPoint2 : Application:This Voltage Regulator Widely Used In Automotive, Surveillance Systems, Railway, Instruments And Meters, Products, Strips, Cable Tv And Other Low Power Systems. 72V To 24V Module
BulletPoint3 : When The Circuit Is At An Unsafe Value, The Built In Protector Automatically Cuts Off The Circuit, And Starts To Work When The Value Returns To The Normal Range
BulletPoint4 : Material:Using Organic Silicone Potting, It Is, And Shockproof, Suitable For Use In Various Harsh Environments
BulletPoint5 : Reliable And:Using Organic Silicone Potting, It Is, And Shockproof, Suitable For Use In Various Harsh Environments. Output Power:600W.:Ip67. Input Voltage Range:72V Dc60 90V
ItemName : Respicefinem Voltage Regulator 72V to 24V Module 10.0×8.0×4.0 Dcdc Voltage Converter Power Module Electronic Transformer Regulator 72V to 24V 25A 600W 72V to 24V Module
ItemPackageDimensions_Height : 4 centimeters
ItemPackageDimensions_Length : 10 centimeters
ItemPackageDimensions_Width : 8 centimeters
ItemTypeKeyword : analog-to-digital-converters
Manufacturer : Respicefinem
ModelNumber : Respicefinemwbr7dvks5c
PartNumber : Respicefinemwbr7dvks5c
ProductDescription :

Item Type: DC‑DC Voltage Converter
Material: Organic silicone + aluminum
Model: GYVRM-JD1L722425
Rated Output Current: 25A
Output Power: 600W
Protection Level: IP67
Conversion Efficiency: Up to 96%
Working Temperature: -20℃~+80℃
Installation Line Length: Approx. 13cm / 5.1in

Package List：
1 x Voltage Regulator1 x Wiring Drawing

Note:
1. In order to ensure the normal operation of the converter within the input voltage range, the input voltage must not be lower than the minimum or maximum input value restricted by the product during use, and the input voltage value must be higher than the output voltage value by more than 2V. If there is no 2V voltage difference, the output value will be lower, but it will not damage (affect) use of the converter.
2. The input current must be greater than or equal to the power required by the output load device (for example, if the power of the load device needs 100W, then the input power must be greater than or equal to 100W). When the converter is in use, the current of the load device should not be greater than the maximum current value that the converter can withstand, and leave as much margin as possible for the converter to ensure that the converter works normally and achieves the highest conversion efficiency.
3. The positive and negative poles of the converter cannot be reversely connected during use. Reverse connection may cause damage to the converter. It is recommended to add a suitable to the input terminal during use.
4. The chip works in light load mode when there is no load, and the output voltage may vary within a certain range.

ProductSiteLaunchDate : 2024-08-15T10:50:15.467Z
Size : DPS5005