Cart 2 india

Specification
Brand : JTLB
BulletPoint : 5pcs 74LVC4066D SOP-14 74LVC4066 SOP14 Multiplexer demultiplexer
BulletPoint1 : This is a very convenient 16 channel CD74HC4067 analog/digital multiplexer/demultiplexer.
BulletPoint10 : Pd - Power Dissipation 250 mW
BulletPoint2 : It is suitable for digital and analog signals (voltage cannot be higher than VCC) and can be connected in either direction. To control this, please connect the four digital outputs to the address selection pin of the chip (SO-S3) and send it the binary address of the desired channel.
BulletPoint3 : Because the multiplexer can also process digital signals, you can use it to transfer TTL-level serial data to multiple devices through pipe or transfer from multiple devices.
BulletPoint4 : The internal switch is bidirectional, with a low on resistance and off leakage, and to prevent cross talk, please turn off the switch first and then on.
BulletPoint5 : Drive it to a high level, and it will completely disconnect the common pins (all switches are disconnected).
BulletPoint6 : Voltage Supply Source Single Supply
BulletPoint7 : Voltage - Supply 2V ~ 5.5V
BulletPoint8 : Operating Temperature -55°C ~ 125°C
BulletPoint9 : Mounting Type Surface Mount
IncludedComponents : No
ItemName : 16 Channel Analog Digital Multiplexer Demultiplexer CD74HC4067 for Analog Signals with S0-S3 Control
ItemPackageDimensions_Height : 5 centimeters
ItemPackageDimensions_Length : 15 centimeters
ItemPackageDimensions_Width : 8 centimeters
ItemTypeKeyword : analog-multiplexers
Manufacturer : JTLB
ModelName : JTLBghb0dkfwin
ModelNumber : JTLBghb0dkfwin
NumberOfItems : 1
PartNumber : JTLBghb0dkfwin
ProductDescription : 1. This is a very convenient 16 channel CD74HC4067 analog/digital multiplexer/demultiplexer.
2. It is suitable for digital and analog signals (voltage cannot be higher than VCC) and can be connected in either direction. To control this, please connect the four digital outputs to the address selection pin of the chip (SO-S3) and send it the binary address of the desired channel.
3. Because the multiplexer can also process digital signals, you can use it to transfer TTL-level serial data to multiple devices through pipe or transfer from multiple devices.
4. The internal switch is bidirectional, with a low on resistance and off leakage, and to prevent cross talk, please turn off the switch first and then on.
5. Drive it to a high level, and it will completely disconnect the common pins (all switches are disconnected).

Spec:
Item Type: Analog Multiplexer
16-channel analog signal switch with CD74HC4067
Analog Signal Input: C0-C15 16 channels
Analog Output: DIG
Channel Control: S0-S3

packing list:
10 x Packs of CD74HC4067 Analog Multiplexer

Notice:
Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.
ProductSiteLaunchDate : 2024-08-02T10:49:58.156Z
SupplierDeclaredDgHzRegulation : unknown
SupplierDeclaredHasProductIdentifierExemption : 1
WarrantyDescription : Manufacturer warranty for 90 day