Specification Brand : Wisoqu BulletPoint : 5pcs 74LVC4066D SOP-14 74LVC4066 SOP14 Multiplexer demultiplexer BulletPoint1 : This is a very convenient 16 channel CD74HC4067 analog/digital multiplexer/demultiplexer. BulletPoint10 : Pd - Power Dissipation 250 mW BulletPoint2 : It is suitable for digital and analog (voltage cannot be higher than VCC) and can be connected in either direction. To control this, please connect the four digital outputs to the address selection pin of the chip (SO-S3) and send it the binary address of the desired channel. BulletPoint3 : Because the multiplexer can also process digital , you can use it to transfer TTL-level serial data to multiple devices through pipe or transfer from multiple devices. BulletPoint4 : The internal switch is bidirectional, with a low on resistance and off leakage, and to prevent cross talk, please turn off the switch first and then on. BulletPoint5 : Drive it to a high level, and it will completely disconnect the common pins (all switches are disconnected). BulletPoint6 : Voltage Supply Source Single Supply BulletPoint7 : Voltage - Supply 2V ~ 5.5V BulletPoint8 : Operating Temperature -55°C ~ 125°C BulletPoint9 : Mounting Type Surface Mount IncludedComponents : No ItemName : 10 PCS 16 Channel Digital Analog Multiplexer Module, Support Voltages Between Ground and VCC, for Digital and Analog ItemPackageDimensions_Height : 5 centimeters ItemPackageDimensions_Length : 15 centimeters ItemPackageDimensions_Width : 8 centimeters ItemTypeKeyword : analog-multiplexers Manufacturer : Wisoqu ModelName : JTLBghb0dkfwin ModelNumber : Wisoquz8itwub3og NumberOfItems : 1 PartNumber : Wisoquz8itwub3og ProductDescription : 10 PCS 16 Channel Digital Analog Multiplexer Module, Support Voltages Between Ground and VCC, for Digital and Analog
Feature:
1. This is a very convenient 16 channel CD74HC4067 analog/digital multiplexer/demultiplexer. 2. It is suitable for digital and analog (voltage cannot be higher than VCC) and can be connected in either direction. To control this, please connect the four digital outputs to the address selection pin of the chip (SO-S3) and send it the binary address of the desired channel. 3. Because the multiplexer can also process digital , you can use it to transfer TTL-level serial data to multiple devices through pipe or transfer from multiple devices. 4. The internal switch is bidirectional, with a low on resistance and off leakage, and to prevent cross talk, please turn off the switch first and then on. 5. Drive it to a high level, and it will completely disconnect the common pins (all switches are disconnected).
Specification: Name: CD74HC4067 high-speed CMOS analog multiplexer 16-channel analog multiplexer 16-channel analog switch using CD74HC4067 Analog input: C0-C15 16 channels Analog output: DIG Channel Control: S0-S3
ProductSiteLaunchDate : 2024-08-02T13:28:58.871Z SupplierDeclaredDgHzRegulation : unknown SupplierDeclaredHasProductIdentifierExemption : 1 WarrantyDescription : Manufacturer warranty for 90 day