Cart 2 india

Specification
BatteriesRequired : 1
Brand : SHANLING
BulletPoint : Stalone Headphone Amplifier with C.A.S.T. Audio Distribution System
BulletPoint1 : - Dual CS43131 chips UA1 Plus uses dual CS43131 chips with extremely high technical specifications, and supports PCM768kHz/32bit and DSD256 hardware solutions. After ingenious tuning by Shanling engineers, the sound of UA1 Plus is better than the previous generation UA1, with a better sense of line, a higher degree of separation of subjective hearing, and better resolution and quality of sound. * The same DAC products on the market generally support 384kHz, UA1 Plus has a significant advantage.
BulletPoint2 : - Super frequency conversion technology, lower power consumption and less heat generation UA1 Plus is equipped with Shanling's self-developed ultra-conversion technology, which can intelligently and dynamically adjust the internal working conditions, effectively reduce power consumption, achieve lower power consumption on the front end, and lower body heat. According to different working conditions, UA1 Plus has standby mode (plug in without playback) and playback mode (normal use). Compared with similar products, the standby power consumption of UA1 Plus is only 40%, and the playback power consumption is only 60%.
BulletPoint3 : - Small body but big energy, 80mW power can drive most earplugs The output power of UA1 Plus is as high as 80mW@32Ω, which is enough to drive most HiFi headphones on the market, and has strong adaptability.
BulletPoint4 : - Wired connection, almost zero delay, allowing you to always seize the opportunity UA1 Plus greatly reduces the delay through wired transmission, and the almost zero delay experience allows you to be online at all times and gain insight into opportunities.
BulletPoint5 : - APP control, support multiple settings, support configuration memory By connecting UA1 Plus with Eddict Player, you can adjust the filter, gain, channel balance, etc., and support the configuration memory function, which can be saved in memory after one setting, and customize your own UA1 Plus. * APP control only supports android client
BulletPoint6 : - Customized wire and special shielding layer, reliable and stable transmission, eliminating interference UA1 Plus uses 7 strands of 18-core high-purity copper wires for stable and reliable transmission. The wire is covered with a braided layer, and the fuselage has a built-in conductive cotton as a shielding cover, which can effectively isolate various electromagnetic radiation and noise interference, high-definition lossless, and easy to use.
BulletPoint7 : - The multi-color display lights correspond to the sampling rate, and the quality of the song is clear at a glance. UA1 Plus supports specifications up to 768kHz / 32bit, DSD256, different sampling frequencies will correspond to different colors of indicator lights, the current specifications are clear at a glance.
Color : Black(C TO C)
CompatibleDevices : Professional audio equipment with 1/4 inch or XLR input
CompatibleDevices1 : Android
CompatibleDevices2 : Audio/PC/Phone/Laptops
CompatibleDevices3 : Headphone
ConnectivityTechnology : Wired
ConnectivityTechnology1 : USB
ConnectivityTechnology2 : Wired
ConnectorGender : Male-to-Female
ConnectorType : Usb
ControlType : Button Control
Directions : 1. Insert batteries, 2. Connect to audio device, 3. Connect headphones, 4. Adjust volume, 5. Attach to belt (optional)
EarpieceShape : in_ear
ExternallyAssignedProductIdentifier : 5060619260054
ExternallyAssignedProductIdentifier1 : 840402049340
ExternallyAssignedProductIdentifier2 : 0840402049340
FitType : body-worn
HardwarePlatform : Not Machine Specific
Hazmat1 : LITHIUM ION BATTERIES CONTAINED IN EQUIPMENT
Hazmat10 : CN_SmallLithiumIonBatteryInEquipment
Hazmat11 : DE_SmallLithiumIonBatteryInEquipment
Hazmat12 : EG_SmallLithiumIonBatteryInEquipment
Hazmat13 : ES_SmallLithiumIonBatteryInEquipment
Hazmat14 : FR_SmallLithiumIonBatteryInEquipment
Hazmat15 : GB_SmallLithiumIonBatteryInEquipment
Hazmat16 : IN_SmallLithiumIonBatteryInEquipment
Hazmat17 : IT_SmallLithiumIonBatteryInEquipment
Hazmat18 : JP_SmallLithiumIonBatteryInEquipment
Hazmat19 : MX_SmallLithiumIonBatteryInEquipment
Hazmat2 : UN3481
Hazmat20 : NL_SmallLithiumIonBatteryInEquipment
Hazmat21 : PL_SmallLithiumIonBatteryInEquipment
Hazmat22 : SA_SmallLithiumIonBatteryInEquipment
Hazmat23 : SE_SmallLithiumIonBatteryInEquipment
Hazmat24 : SG_SmallLithiumIonBatteryInEquipment
Hazmat25 : TR_SmallLithiumIonBatteryInEquipment
Hazmat26 : US_SmallLithiumIonBatteryInEquipment
Hazmat27 : ZA_SmallLithiumIonBatteryInEquipment
Hazmat3 : II
Hazmat4 : 9
Hazmat5 : AE_SmallLithiumIonBatteryInEquipment
Hazmat6 : AU_SmallLithiumIonBatteryInEquipment
Hazmat7 : BE_SmallLithiumIonBatteryInEquipment
Hazmat8 : BR_SmallLithiumIonBatteryInEquipment
Hazmat9 : CA_SmallLithiumIonBatteryInEquipment
HeadphonesEarPlacement : in_ear
HeadphonesFormFactor : In Ear
Impedance : 32 ohm
IncludedComponents : Cable
IncludedComponents1 : 1X UA1 Plus Headphone Amplifier
IncludedComponents2 : 1X Lanyard
IncludedComponents3 : 1X USB A to Type-C Adapter
IncludedComponents4 : 1X USB Type-C to C data cable
IncludedComponents5 : 1X Quick Start Guide+Warranty Card
IndoorOutdoorUsage : outdoor
ItemName : SHANLING UA1 Plus Headphone Amps Amplifier Tiny Portable USB DAC High Resolution Dual 43131 DAC,CT701 USB Receive Chip,Support Up to 768kHZ/32bit,DSD256 Android app Control (Black(C to C))
ItemPackageDimensions_Height : 1.06 inches
ItemPackageDimensions_Length : 3.9 inches
ItemPackageDimensions_Width : 3.35 inches
ItemPackageQuantity : 1
ItemTypeKeyword : headphone-amps
Language : english
Manufacturer : Shanling
Material : Plastic
ModelName : SHANLING UA1 Plus
ModelNumber : SHANLING UA1 Plus
NoiseControl : none
NumberOfItems : 1
NumberOfPins : 6
NumberOfPorts : 2
PackageLevel : unit
PartNumber : SHANLING UA1 Plus
PowerSourceType : Battery Powered
ProductDescription : SHANLING UA1 PLUS USB DAC & AMP CS43131*2 DAC chips; 3.5mm single-ended headphone jack; 80mW@32Ω output power ; Support up to PCM768kHz/32bit DSD256; Interchangeable cable design; Super frequency conversion technology, ultra-low power consumption, CT7601 high-performance USB master. - Dual CS43131 chips UA1 Plus uses dual CS43131 chips with extremely high technical specifications, and supports PCM768kHz/32bit and DSD256 hardware solutions. After ingenious tuning by Shanling engineers, the sound of UA1 Plus is better than the previous generation UA1, with a better sense of line, a higher degree of separation of subjective hearing, and better resolution and quality of sound. * The same DAC products on the market generally support 384kHz, UA1 Plus has a significant advantage. - Super frequency conversion technology, lower power consumption and less heat generation UA1 Plus is equipped with Shanling's self-developed ultra-conversion technology, which can intelligently and dynamically adjust the internal working conditions, effectively reduce power consumption, achieve lower power consumption on the front end, and lower body heat. According to different working conditions, UA1 Plus has standby mode (plug in without playback) and playback mode (normal use). Compared with similar products, the standby power consumption of UA1 Plus is only 40%, and the playback power consumption is only 60%. - Small body but big energy, 80mW power can drive most earplugs The output power of UA1 Plus is as high as 80mW@32Ω, which is enough to drive most HiFi headphones on the market, and has strong adaptability. - Wired connection, almost zero delay, allowing you to always seize the opportunity UA1 Plus greatly reduces the delay through wired transmission, and the almost zero delay experience allows you to be online at all times and gain insight into opportunities. - APP control, support multiple settings, support configuration memory By connecting UA1 Plus with Eddict Player, you can adjust the filter, gain, channel balance, etc., and support the configuration memory function, which can be saved in memory after one setting, and customize your own UA1 Plus. * APP control only supports android client - Customized wire and special shielding layer, reliable and stable transmission, eliminating interference UA1 Plus uses 7 strands of 18-core high-purity copper wires for stable and reliable transmission. The wire is covered with a braided layer, and the fuselage has a built-in conductive cotton as a shielding cover, which can effectively isolate various electromagnetic radiation and noise interference, high-definition lossless, and easy to use. - The multi-color display lights correspond to the sampling rate, and the quality of the song is clear at a glance. UA1 Plus supports specifications up to 768kHz / 32bit, DSD256, different sampling frequencies will correspond to different colors of indicator lights, the current specifications are clear at a glance.
ProductSiteLaunchDate : 2024-12-29T06:03:12.133Z
RecommendedUsesForProduct : In-ear monitoring applications, studio use, stage use
RecommendedUsesForProduct1 : Audio Amplification
RecommendedUsesForProduct2 : Music
SpecificUsesForProduct : RM
SpecificUsesForProduct1 : Audio Amplification
SpecificUsesForProduct2 : DAC Converting
StrapType : Belt Clip
Style : Portable
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
SurroundSoundChannelConfiguration : 3
TargetGender : unisex
TunerTechnology : DAB
UnitCount : 1
UnspscCode : 52161500
WarrantyDescription : 1 Year Manufacturer
WarrantyType : Limited