Cart 2 india

Specification
AgeRangeDescription : adult
Brand : NHJLFKSA
BulletPoint1 : Ammeters
BulletPoint2 : DC LCD lithium iron phosphate Waterproof battery electric meter voltmeter DC8-100V Lithium Battery Power Detector
BulletPoint3 : Item weight: 0.11 pounds
BulletPoint4 : Material: paper
Color : Green-12V
ExternallyAssignedProductIdentifier : 9495899593145
ItemName : DC LCD lithium iron phosphate Waterproof battery electric meter voltmeter DC8-100V Lithium Battery Power Detector(Green-12V)
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : automotive-instrument-panel-amp-meter-gauges
Manufacturer : NHJLFKSA
ModelName : NHJLFKSA
ModelNumber : NHJLFKSA
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : NHJLFKSA
ProductDescription : Ammeters
Description
1. Voltage
Measurement range: DC8-100V
Display format
<;10V display format such as:9.99V
<;100V display format such as:99.9V
100V display format such as: OL
Accuracy:±1%
2. Percentage Range:0%-
Display format
<;10%display format such as:9%
<;100%display format such as:99%
100%display format such as:
3. Battery symbol
Graphical
Five cell symbol, each representing 20%
Display format
SOC >90% display full cells
<;SOC 90% the first cell is flicker
SOC80% display four cells
<;SOC70% the second cell is flicker
Battery specification selection
If you want to change the battery specification during using, you can set it as follows:
Step 1: Press the key for 1 second until the words like [60V L] appear on the screen , and then release the key;
Step 2: Short press the key to select the battery specification.
Step 3: Long press the key for 1 second or stop the key action for 2 seconds, the data will be saved and to the normal display interface.
Calibration
All products have been calibrated before leaving the . If you think there is deviation, you can calibrate by yourself. The methods are as follows:
Step 1: Long press the key when the meter is powered off
Step 2: Input the standard DC 20V voltage
Step 3: The LCD displays CAL PASS and returns to the normal display interface that means the calibration is successful, then release the key
ProductSiteLaunchDate : 2024-04-13T01:12:06.125Z
Size : One Size
UnitCount : 1