Cart 2 india

Specification
Brand : Evike
BulletPoint1 : Precision rotary dial design for fine hopup adjustments
BulletPoint10 : CNC Aluminum Hopup Chamber M4E (w/ BB Latching System) unit is precisely machined to perform accurately and consistently on Tokyo Marui (including G&G, KRYTAC, except KWA) standard Airsoft M4 AEG series
BulletPoint11 : Additionally, the Hopup Chamber M4E unit is specially designed w/ a new BB Latching System to prevent BBs from dropping after removing the mag. The Latching Arm can also be manually pressed to release the remaining BB from inside the hopup chamber.
BulletPoint12 : Test results: FPS might be increased by 5% to 10%. Please check your FPS!
BulletPoint13 : Machined from a solid high-grade aluminum block with tight tolerances to provide better accuracy, consistency and durability
BulletPoint14 : BB position is seated straight and consistent 95% stacking up each BB perfectly
BulletPoint15 : Prevents jamming and double feeding
BulletPoint16 : Designed for tighter tolerances to improver consistency and accuracy
BulletPoint2 : Re-engineered the hopup levers and concave nubs to work best with R-hop, Flat-Hop and Standard-Hop to keep the BBs straight and accurate
BulletPoint3 : Accepted the nozzle length from 21.00mm to 21.25mm
BulletPoint4 : Fully compatible with most aftermarket soft and hard rubber bucking without losing FPS or dropping BBs
BulletPoint5 : Equipped with a new CNC Delrin Locking C-Clip design to hold tight without wobbling and twisting, 3 compression springs on top, at bottom and in center of housing to ensure the hopup unit is exactly centered, straight and air tight
BulletPoint6 : Compatible with any V2 gear boxes with 11mm or 11.5mm bore
BulletPoint7 : Specially designed with BB Latching System to prevent dropping BBs after removing the mag, manually opened to release BBs from inside hopup chamber by hand
BulletPoint8 : Model: M4E / EMG Blue
BulletPoint9 : The Hopup Chamber M4E unit has been designed to prevent jamming & double feeding, line the BBs straight and consistent, and stacking up perfectly! They also no longer have screws in place of the hopup arm and are replaced by o-rings to keep the pivot pin. Internal design is updated for tighter tolerances and improves overall consistency & accuracy.
Color : M4E / EMG Blue
Department : unisex
Hazmat1 : LITHIUM ION BATTERIES PACKED WITH EQUIPMENT
Hazmat10 : DE_SmallLithiumIonBatteryWithEquipment
Hazmat11 : EG_SmallLithiumIonBatteryWithEquipment
Hazmat12 : ES_SmallLithiumIonBatteryWithEquipment
Hazmat13 : FR_SmallLithiumIonBatteryWithEquipment
Hazmat14 : GB_SmallLithiumIonBatteryWithEquipment
Hazmat15 : IE_SmallLithiumIonBatteryWithEquipment
Hazmat16 : IN_SmallLithiumIonBatteryWithEquipment
Hazmat17 : IT_SmallLithiumIonBatteryWithEquipment
Hazmat18 : JP_SmallLithiumIonBatteryWithEquipment
Hazmat19 : MX_SmallLithiumIonBatteryWithEquipment
Hazmat2 : UN3481
Hazmat20 : NL_SmallLithiumIonBatteryWithEquipment
Hazmat21 : PL_SmallLithiumIonBatteryWithEquipment
Hazmat22 : SA_SmallLithiumIonBatteryWithEquipment
Hazmat23 : SE_SmallLithiumIonBatteryWithEquipment
Hazmat24 : SG_SmallLithiumIonBatteryWithEquipment
Hazmat25 : TR_SmallLithiumIonBatteryWithEquipment
Hazmat26 : US_SmallLithiumIonBatteryWithEquipment
Hazmat27 : ZA_SmallLithiumIonBatteryWithEquipment
Hazmat28 : 9
Hazmat3 : II
Hazmat4 : AE_SmallLithiumIonBatteryWithEquipment
Hazmat5 : AU_SmallLithiumIonBatteryWithEquipment
Hazmat6 : BE_SmallLithiumIonBatteryWithEquipment
Hazmat7 : BR_SmallLithiumIonBatteryWithEquipment
Hazmat8 : CA_SmallLithiumIonBatteryWithEquipment
Hazmat9 : CN_SmallLithiumIonBatteryWithEquipment
ImportDesignation : Imported
IncludedComponents : Ergonomic Finger Pad
ItemName : Evike EMG/Maxx Model CNC Aluminum Hopup Chamber for M4 Airsoft AEG Rifles (Model: M4E / EMG Blue)
ItemPackageDimensions_Height : 1.4 inches
ItemPackageDimensions_Length : 6.75 inches
ItemPackageDimensions_Width : 3.65 inches
ItemTypeKeyword : airsoft-tools
Manufacturer : EMG
Material : Plastic
ModelName : VOLCANO
NumberOfBoxes : 1
PartNumber : HU-MX-HOP020EMG
Pattern : Solid
ProductDescription : The Hopup Chamber M4E unit is built w/ an aluminum rotary dial knob for fine hopup adjustments, the precision hopup lever, 4mm bucking nubs to perform best w/ R-Hop, and standard-hop to keep the BB accurate and consistent. It's also designed to accept 21.00mm to 21.25mm nozzle length and fully compatible w/ most aftermarket soft and hard rubber buckings without losing FPS or dropping BBs during use.

The Hopup Chamber M4E unit is wisely equipped w/ an interchangeable Inlet Adaptor OD11mm to ensure the hopup unit is inserted exactly in the center of the 11mm inner bore AEG Gearbox/HPA Engine nozzle outlet w/o wobbling. Also mounted the removable CNC brass side wings to slide smoothly into the outer-b slots, and included an advanced CNC Delrin locking C-clip to hold the inner-b tightly in place w/o wobbling and twisting.

Hopup Kit Includes:
+ Hopup Chamber M4E Pro (w/ BB Latching System) unit
+ Acrylic Side Covers
+ Brass 2.5mm Side Wings
+ Steel Pivot Pin
+ Hopup Lever
+ Soft Round Nub
+ Soft Flat Nub (4mm)
+ Hard Concave Nub (4mm)
+ Steel Spring Guide
+ Delrin Locking C-Clip
+ Brass B-Spacer & Holder O-ring
+ Rotary Dial Knob
+ Inlet Adaptor (OD11mm)
+ Brass Inlet Spacer
+ Nub Springs
+ Upper & Center Compression Spring

Length: 51.65mm
Height: 37.75mm
Inlet Adaptor Outer Diameter (to fit into Gear Box): 11mm
Hub Outer Diameter (to fit into Outer-B): 12mm
Hub Inner Diameter (to fit Nozzle): 8mm
Feeder Outer Diameter (to fit mag): 8.85mm
Feeder Length (to fit mag): 6mm
Application: Tokyo Marui G&G, Madbull, Modify, TNT, Krytac, Maple Leaf, Begadi, VFC and other compatible Airsoft M4-Style standard AEG version 2 gear box
Material: Aluminum 6061
ProductSiteLaunchDate : 2024-07-15T18:02:13.229Z
Size : Outdoor Safe Airsoft Play Cosplay Prop Game Events
Style : Ergonomic Finger Pad
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 49000000
WarrantyDescription : 1-year Repair Service against Manufacturer Defects