Cart 2 india

Specification
Brand : HMKJHL
BulletPoint1 : Fitment:for the Heart of an Airide Spring. Includes at Least 4 Plies,or Layers,of Material–an Inner Layer,2 Plies of Cord-Reinforced Fabric,and an Outer Layer;for a Solid Molded Rubber Fail-Safe Device Used on Many Suspension Applications. stops Excessive Damage to Vehicle and Suspension in the Case of Sudden Air Pressure Loss
BulletPoint2 : Material:Iron,Aluminium Alloy,Rubber
BulletPoint3 : Size:Single Dimension(Cm) 32.00(Length)*32.00(Width)*23.00(Height)
BulletPoint4 : Location: Left,Right,Front,Rear
BulletPoint5 : Part_Number:3B12-312,S-14487,W01-358-8033,578-93-3-100,003316
ExternallyAssignedProductIdentifier : 3223030838987
FitType : Universal
ItemName : HMKJHL 2pcs Air Suspension Shock Absorber Strut and Spring Set Front Rear Left Driver and Right Passenger Inner Outer Lower Side Rubber Fiber Alloy Iron Aluminum 3B12-312 E825752CP01 HR1316
ItemTypeKeyword : air-springs
Manufacturer : HMKJHL
ModelName : air-springs
ModelNumber : air-springs
NumberOfItems : 1
PartNumber : AFAA86250-E825752CP01
ProductDescription : Condition
1-hundred percent unused product in factory packaging, . ensures quality and performance of the product.

Material
Iron,Aluminium Alloy,Rubber

Size
Single Dimension(CM) 32.00(Length)*32.00(Width)*23.00(Height)

Air Suspension Structure
A Permanent Part Of The Bead Plate Assembly Used To Attach The Airspring To The Suspension
Combo Stud
Combination Mounting Stud and Air Fitting
Blind Nut
A Permanent Part Of The Bead Plate Assembly Providing An Alternate Mounting System To The Stud
Air Fitting Hole
A tapped hole usually 1/4" N.P.T. providing air entrance for the part
Permanently Crimped Onto The Bellows At The Factory Allowing Complete Part Leak Prior To Shipment
Bumper (Optional)
The lower section of the 1T and 1X style of airspring made from aluminum,steel or fiber reinforced plastic. Provides lower mounting arrangement for the airspring in the form of tapped holes or studs
Piston Bolt
Attaches The Piston To The Bellows Assembly. Extended,in Some Cases,To Serve As A Means Of Attaching The Spring To The Suspension
Girdle Hoop
A Ring Between The Convolutions Of The Convolutedtype Air Spring

Removal Warning & Notice
Any Rear Spring Which Is Unfolded Must Be Refolded Prior To Being Installed in A VehicleThe Air Spring Refolding Procedure Should Be Used For An Air Spring Which Has Never Supported The Vehicle' Weight While in The Incorrectly Folded Position
Do Not Attempt To Inflate Any Air Spring Which Has Been Collapsed While Uninflated From The Rebound Hanging Position To The Stop
When Installing A New Air Spring,Care Must Be Taken Not To Apply A Load To The Suspension Until Springs Have Been Inflated Using The Air Spring Fill Procedure
After Inflating An Air Spring in The Hanging Position,It Must Be Inspected For Correct Shape


Adjustable
Yes
ProductSiteLaunchDate : 2024-07-18T02:32:42.275Z