Cart 2 india

Specification
Brand : Acouto
BulletPoint : Pneumatic Equipment / Air Cylinders
BulletPoint1 : ack25 - 90l With high speed , the maximum operating speed can 200mm per second .
BulletPoint2 : Assembly Line Cylinder It is a double‑acting clamping corner press cylinder with an inner diameter of 25mm .
BulletPoint3 : ACK25 - 90R/L cylinder Made of high‑quality aluminium alloy , which makes it more and long‑lasting .
BulletPoint4 : Down press cylinder The maximum working pressure with this pneumatic cylinder can 1 . 0MPa .
BulletPoint5 : ACK25 - 90R/L Clamping Angle Down Cylinder The shape is small and can be rotated by 90 degrees , which is convenient , fast and labor‑saving .
Color : I-25I32 (M8x1.25)
ExternallyAssignedProductIdentifier : 7361532832518
ItemName : Pneumatic Cylinder 90 Degree Angle Clamping Corner Pressing Swing Tool Angle Cylinder Ack25-90l (ACK25-90R)
ItemPackageDimensions_Height : 5 centimeters
ItemPackageDimensions_Length : 10 centimeters
ItemPackageDimensions_Width : 7 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : industrial-air-cylinders
Manufacturer : Acouto
ModelName : Acoutocfvr4xzkoq-11
ModelNumber : Acoutocfvr4xzkoq-11
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : Acoutocfvr4xzkoq-11
ProductDescription : Condition : Brand New
Item Type : Pneumatic Cylinder
Color : As Pictures Shown
Material : Aluminium Alloy
Inner Diameter : Approx . 25mm/0 . 98in
Outer Diameter of Piston Rod : Approx . 14mm/0 . 6in
Action Type : Compound ActionType
Working Medium : ( filtered through a filter 40μm )
Service Pressure : 0 . 15 - 1 . 0mpa ( 22~145psi )
Guaranteed Pressure : 1 . 5MPa ( 215psi )
Working Temperature : - 20 - 80℃
Operating Speed : 50 - 200mm/s
Range of Travel Tolerance : 1 . 0
Rotation Angle Tolerance : ±1 . 5°
Buffer Type : None
Pipe Diameter : M5x0 . 8
Installation and Use
1 . When the cylinder clamps the workpiece , it must be performed within the clamping stroke , and the clamping cannot be performed within the rotation stroke .
2 . The clamping plane must be perpendicular to the cylinder . After the workpiece is clamped , please do not move the workpiece .
3 . Before piping the cylinder , the debris in the pipe must be removed to debris from entering the cylinder .
4 . The medium used in the cylinder should be filtered by a filter 40μm before use .
5 . When the cylinder is removed and not used for a time , pay attention to - on the , add - blocking to the intake and ports , and apply - oil to the piston rod end
ProductSiteLaunchDate : 2024-10-16T12:24:48.158Z
Size : ACK25-90R
UnitCount : 1
UnspscCode : 31162900