Cart 2 india

Editorial Review
FINISH-CURE 20 min. epoxy is an excellent, low odor substitute for polyester resins. It can be used for applying fiberglass cloth to wood or by itself to give wood a surface ready for primer and paint. FINISH-CURE can be sanded the easiest of all our epoxies and is excellent for the sheeting of foam core wings. Allow 8 hours for full curing. For best results, FINISH-CURE should be heated to a temperature above 85 degrees F or applying light weight fiberglass, lay cloth on balsa first, then brush on FINISH-CURE. When fully saturated, go over the surface with a heat gun, and then squeegee off excess epoxy with a playing card from an old deck. Heat and remove excess several times for a light weight finish. If room temperature is below 70 degrees F use a heat gun on the surface several times for the next 2 hours. When dry, lightly sand, then fill surface with a low weight spakeling compound, scrapping off excess with a playing card. Sand to a smooth finish ready for primer. For heavy weight fiberglass, apply the epoxy before and after laying down the cloth. FINISH-CURE is best mixed in a disposable cup.

Features
1) Made by Bob Smith Industries; Bob Smith Industries is a United States based company; parts are sourced from American producers
2) Bob Smith Industries part number 210; UPC 707336210003

Specification
Binding : Toy
Brand : Bob Smith Industries
EAN : 0707336210003
Label : Bob Smith Industries
Manufacturer : Bob Smith Industries
PackageDimensions_Weight : 1.05 pounds
PackageDimensions : L:5.70 X W:5.40 X H:1.90
ProductGroup : Toy
ProductTypeName : HOBBIES
Publisher : Bob Smith Industries
Studio : Bob Smith Industries
Title : Finish-cure 20min epoxy 13oz Bob Smith Ind.