Cart 2 india

Specification
Brand : DINITROL
BulletPoint1 : Benefits: - good adhesion on paints - excellent decking and standing properties - fast curing - high modulus - low odor - excellent working characteristics - high modulus and low conductivity - high elasticity - solvent and PVC free - works at ambient temperatures from -18 C to 45 C - OEM approved - Crash test approved acc. FMVSS 212 - ageing and weather resistant
BulletPoint2 : Directions: This urethane requires the use of DINITROL 538 PLUS Primer, this is not a primerless urethane. All bonding areas must be clean, dry and free from all contaminates. The glass must be pretreated with either the one-step-primer 538 plus, or with the Activator Plus. If there is no existing urethane on the pinchweld to use as a substrate, apply either 538 Plus or D-530 to the pinchweld bonding area.
BulletPoint3 : Method of use: The application of the DINITROL 9100 is done by extrusion out of foil wraps and cartridges. Requires power caulking gun or 26:1 thrust ratio to properly dispense. Product has very high viscosity and can not be dispensed without proper equipment. The use of this product is suitable only for experienced users. Pre-tests are recommended for special applications.
BulletPoint4 : Fast Curing times Safe Drive Away Time - Temperature Time - 0 F (-18 C) to 115 F (46 C) at RelativeHumidity 0 - 100% - 30 minutes Safe Drive Away Time
BulletPoint5 : (2) 310ml tube/cartridges. Require cartridge style caulking gun to dispense.
ExternallyAssignedProductIdentifier : 00197040000470
ExternallyAssignedProductIdentifier1 : 0648609872002
ExternallyAssignedProductIdentifier2 : 648609872002
FitType : Vehicle Specific
ItemName : DINITROL 9100 HD Automotive Urethane / 310ml 2 Tubes 30min Cure
ItemPackageDimensions_Height : 3 inches
ItemPackageDimensions_Length : 9 inches
ItemPackageDimensions_Width : 4 inches
ItemTypeKeyword : automotive-adhesives
Manufacturer : DINOL
NumberOfItems : 2
OemEquivalentPartNumber : D154103A1
PartNumber : 9100 HD
ProductDescription : (2) 310ml tube/cartridges. Require cartridge style caulking gun to dispense.
Polyurethane adhesive for auto windscreen direct glazing. Direct glazing applied cold adhesive. The black colored one component applied cold polyurethane adhesive is designed for the direct-glazing of automotive glasses. The product enables a 30 minute safe drive away once applied for customer convenience.
DINITROL 9100 provides good adhesion on paints with excellent working characteristics. The fast curing, low conductive, high elasticity, solvent and PVC free adhesive works on all vehicles whilst in ambient temperatures from -18 deg C to 45 deg C. Storage in closed packaging between 0 and 35 C.
*For complete instructions on how to use and apply the DINITROL glass bonding systems, please refer to the DINITROL AGR Training Manual.
*This product is a professional use product and should only be used by certified technicians. The seller highly recommends the buyer to use a professional auto glass installer for proper knowledge and use of this product. The buyer agrees to hold harmless seller and manufacturer for any liability with regard to the use and handling of this product. The buyer understands that by purchasing this product to use themselves without the use of a professional as recommend by the seller and manufacturer serious injury or death may result. *
ProductSiteLaunchDate : 2022-08-15T19:20:35.783Z
Style : Compact
UnitCount : 2
UnspscCode : 31201600