Cart 2 india

Specification
Brand : TuBaSaki
BulletPoint1 : Solid and Durable: The glue dispenser machine is made of metal, strong and stable, not easy to damage and corrosion, but also uses the fourth generation chip design circuit board, significantly improving stability.
BulletPoint2 : Vacuum Back Suction: This semi-automatic glue dispenser machine is equipped with a vacuum back suction device, which can effectively guard against the glue from dripping during use to achieve a more accurate glue dripping, and ensure a clean and tidy working environment.
BulletPoint3 : Precise Drip: The minimum drip volume is 0.01ML, and the spitting interval is 0.1-9.9s. It can drip precisely and achieve a repeat accuracy of about 0.5%. It is also equipped with a single-hole hand control switch, allowing you to control it personally by hand for more accuracy and timeliness.
BulletPoint4 : Semi-automatic Design: It can be both automatically dripped by the machine and precisely controlled by a single-hole hand switch. If you want to free your hands, you can set the switch to the automatic position, to achieve a more efficient and higher-quality working method.
BulletPoint5 : Wide Application: This pneumatic dispensing machine is suitable for most of the yellow glue, quick-drying glue, epoxy resin, etc. in the market, and is widely used in bonding various electronic components, machine production, instrumentation, jewelry, and other objects.
Color : Yellow
ExternallyAssignedProductIdentifier1 : 0616943638790
ExternallyAssignedProductIdentifier2 : 616943638790
FinishType : Chrome
IncludedComponents : tube
IncludedComponents1 : 1* Dispenser Main Unit, 1* Manually Switch, 1* Foot Switch
IncludedComponents2 : 1* Air Tube, 1* Connection Tube, 1* Power Cord, 1*Dispenser Stand
IncludedComponents3 : 2* 30CC Liquid Barrels, 6* Dispensing Needles, 1* Chinese and English Manual
ItemForm : Liquid
ItemName : Glue Dispenser Machine Pneumatic Dispensing Machine Semi-Automatic//Manual Glue Dispenser Glue Dispenser Solder Liquid Controller
ItemPackageDimensions_Height : 76.2 millimeters
ItemPackageDimensions_Length : 152.4 millimeters
ItemPackageDimensions_Width : 50.8 millimeters
ItemPackageQuantity : 1
ItemTypeKeyword : adhesive-dispenser-accessories
Manufacturer : TuBaSaki
Material : Epoxy Resin
ModelNumber : Glue Dispenser Machine
NumberOfItems : 1
PartNumber : MIXPAC_DS53_GUN
PowerSourceType : air powered
ProductDescription :

Specification

Color: Black

Model: 982

Material: Metal

Spitting Mode: Manual / Semi-automatic

Minimum Drip Volume: 0.01ml

Spitting Time Interval: 0.1-9.9s

Automatic Timing(Can Be Set): 0.01-30s

Repeat Accuracy: ±0.5%

Internal Voltage: 12-24DC

Input Air Pressure: 2.5-7bar(35-100psi)

Output Air Pressure: 0.1-5.5bar(1-78psi)

Power Supply: 110V AC, 60Hz

Power Consumption: 20W

Plug Specification: American Standard 110V

Product Size:23*15*6cm/9.05*5.9*2.36in

Package Size:20*26*14cm/10*9*12.5in

Gross Weight: 2.1kg/4.63 lbs

 

Package Included

1* Dispenser Main Unit

1* Manually Switch

1* Foot Switch

1* Air Tube

1* Connection Tube

1* Power Cord

1*Dispenser Stand

2* 30CC Liquid Barrels

6* Dispensing Needles

1* Chinese and English Manual

 

Notes: 

1. The input high pressure should not exceed 7 bar (100psi), and the maximum working pressure of the glue dropper should not exceed 5.5 bar (78psi). If the working air pressure is above 4 bar, please switch to aluminum connectors.

2. If available, store all materials at a constant temperature (5°) as directed to ensure that the concentration does not change significantly during use.

3. When the material concentration is too large (flow difficulties), can not drip, if you want to use it, according to the manufacturer's instructions dilute the use; before work, the material must be fully stirred evenly to ensure that the size of the drip consistent.

4. Automatic state, the general air pressure adjustment in the machine at 1-2.7bar (15-40psi) is more appropriate. When working in the automatic state, the strength of the vacuum tube pumping back air should be adjusted to the proper position. Too much pumping back will flush the piston and destroy the normal operation.

5. Automatic state work, according to the actual situation, timely removal of the material left at the needle nozzle, these materials gradually curing will block the muzzle discharge and back pumping; after work, the barrel should be cleaned in time, otherwise, the barrel's disassembly will be very difficult.

6. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement and make sure you do not mind before ordering.

ProductSiteLaunchDate : 2023-11-10T06:49:47.817Z
Size : 8.5X2X0.6CM
SpecificationMet : energy
Style : Trigger
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 31200000
Voltage : 110 volts