Cart 2 india

Specification
Brand : Gdrasuya10
BulletPoint : Dispensing parts 3cc ML Barrel Adapter Fitting with o-ring 10 PCS
BulletPoint1 : ✅ 【Specification】Model: X001; Power: 900W; Sol speed: 3KG/HR; Solvent capacity: 3KG/HR; Maximum viscosity; 10000 CPS; Working temperature: 160-180°C; Temperature control range: 0-300°C
BulletPoint2 : ✅【Professional Glue Machine】This commercial hot melt glue gun is made of high-quality materials, with a strong and durable appearance, with good impact resistance and heat dissipation. The surface has been carefully painted to make it have superior anti-oxidation properties, not easy to age and rust, and have a long service life.
BulletPoint3 : ✅【Wide application】This high-quality hot melt glue gun is widely used in the bonding, fixing, wiring, insulation, etc. of toys, trinkets, small household appliances, handicrafts, electronic components, etc. It has stable and superior performance and is a good helper for DIY design.
BulletPoint4 : ✅【Precautions】Please always wear safety gloves, goggles and long-sleeved overalls when using the machine to avoid being scalded by hot liquid hot melt glue; the pressure of the storage tank must be released before heating the melted glue; the maximum total The air pressure is set to 4KG; the air circuit should avoid too much water vapor entering; the hot melt adhesive capacity should not exceed seven points of the storage tank capacity.
BulletPoint5 : ✅ 【Customer Service】Our products are sent from the US and can be delivered quickly.Our products have undergone strict quality inspection procedures to ensure that the products put into the market are of high quality. If you have any questions, please feel free to contact us. We will sincerely provide you with high-quality service and bring you a pleasant shopping experience.
Color : Black
CompatibleMaterial : Plastic
ExternallyAssignedProductIdentifier : 7773638307218
ExternallyAssignedProductIdentifier1 : 0717461371821
ExternallyAssignedProductIdentifier2 : 717461371821
ItemName : 10000 CPS Viscosity Commercial Hot Melt Glue Spray Injecting Machine Glue Dispenser Professional Adhesive Injecting Dispenser Equipment(110V 900W)
ItemPackageDimensions_Height : 18 centimeters
ItemPackageDimensions_Length : 3.9 centimeters
ItemPackageDimensions_Width : 14.8 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : adhesive-dispenser-accessories
Manufacturer : Botshop-US
Material : Plastic
ModelNumber : AUD2600CA0725-FBA
PartNumber : Zerodisdng0yhxrp53690
PowerSourceType : Corded Electric
ProductDescription :

Adhesive Dispenser Hot Melt Glue 0-300 C Gluing Machine 110V 3KG/HR

Features：

Model: X001

Power: 900W

Sol speed: 3KG/HR

Solvent capacity: 3KG/HR

Maximum viscosity; 10000 CPS

Working temperature: 160-180°C

Temperature control range: 0-300°C

Safety Precaution:

Always wear safety gloves, goggles, and long-sleeved overalls to avoid burns from hot liquid hot melt adhesive

1. The gas circuit should avoid too much water vapor entering

2. The hot melt adhesive capacity must not exceed seven points of the capacity of the storage bucket.

3.The maximum total air pressure is set to 4KG

4. Before heating the melted glue, the pressure of the storage bucket must be released first.

Preparation for Operation

1. Confirm the safety protection measures

2. Check if the machine is 110VAC and there is no fluctuation in the pressure

3. See if the temperature of the plastic bucket is set at about 170 degrees (different hot melt adhesives have different softening points. For specific setting values, refer to the data provided by the hot melt adhesive supplier)

5. Check whether the foot switch is connected and whether any conductive objects have touched the components in the electric control box.

6. Check if the air supply system is basically dry and the air pressure is stable

7. Power on and test the circuit of each part.

Boot Steps

1. Connect the power and turn the power switch to ON

2. Check if the temperature of the temperature controller is within the above range

3. Check whether the pressure relief is turned in the direction of pressure holding

4. Connect the origin, set the pressure value, and start the operation

NOTE: The product needs to be used with an air compressor

ProductSiteLaunchDate : 2022-08-23T09:06:00.896Z
Style : Trigger
SupplierDeclaredDgHzRegulation : other
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
UnitCount : 1
UnspscCode : 27112700
Voltage : 110 volts
Wattage : 900 watts