Cart 2 india

Specification
Brand : ciciglow
BulletPoint1 : FULL DECODED BATTERY: The NP FW50 dummy battery is fully decoded, providing the same performance as the original NP FW50 battery. It is an ideal substitute for LP E6 batteries and offers continuous power for long photography sessions.
BulletPoint2 : FAST CHARGING SUPPORT: The dummy battery supports fast charging protocols, including 9V, 12V, 15V, and 20V, making it compatible with popular fast charging adapters. It can input power from 9 to 20V and output 8.4V (maximum 24W).
BulletPoint3 : SAFETY : The built-in overvoltage, overcurrent, and short circuit circuit ensures usage, providing peace of mind even with counterfeit batteries. This feature offers enhanced for your camera.
BulletPoint4 : HIGH CONVERSION EFFICIENCY: With a wide voltage power supply and a conversion efficiency of up to 98%, the dummy battery generates minimal heat while delivering a high-power output. This allows for continuous shooting without any interruptions.
BulletPoint5 : USER-FRIENDLY DESIGN: The Type C interface makes it compatible with various devices, including car power adapters and PD QC chargers. It is suitable for both indoor and outdoor photography sessions. The power indicator light clearly displays the working status at a .
CompatibleDevices : Camera
ItemName : ciciglow NP FW50 Dummy Battery for A7 A7R A7S A7II A7RII A7SII A6500 A6400 A6300 A6100 A6000 A5100 A5000 A3000 NEX5 NEX7 DSC RX10 II III IV ZV E10 Digital Camera
ItemPackageDimensions_Height : 2 centimeters
ItemPackageDimensions_Length : 12 centimeters
ItemPackageDimensions_Width : 10 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : camera-power-adapters
Manufacturer : ciciglow
ModelName : ciciglowux7mbf6qr1
ModelNumber : ciciglowux7mbf6qr1
PartNumber : ciciglowux7mbf6qr1
ProductDescription : Specification:
Item Type: Digital Camera Dummy Battery
Material: ABS, metal
Weight: Approx. 32g/1.1oz
Cable Length: Approx. 50cm/19.7in
TYPE C Input: QC PD 9 to 20V
TYPE C Output: 8.4V (Maximum 24W)
Support fixed voltage or single chip control mode
Support PD Protocol: 5V, 9V, 12V, 15V, 20V
Support QC Protocol: 5V, 9V, 12V, 20V
Support FCP Protocol: 5V, 9V, 12V
Support for Samsung AFC Protocol: 5V, 9V
CLASS A and CLASS B voltage levels are supported
Applicable Model: Suitable for A7, A7R, A7S, A7II, A7RII, A7SII, A6500, A6400, A6300, A6100, A6000, A5100, A5000, A3000, NEX5, NEX7, DSC RX10 II, III, IV, ZV E10 and other digital cameras

How to Use:
1. Use USB to TYPE C cable or TYPE C to TYPE C cable to access the power supply with fast charging agreement
2. Insert the dummy battery into the TYPE C end, the green POWER indicator light is on for normal operation, and if it is not on, there is no power input
3. The dummy battery into the battery compartment, cover the battery cover
4. Open the camera power switch for normal use
Note: (When the input is 9V when the output may only be 7.8V for the normal voltage drop, can be used normally, the camera may not show full power)

Package List:
1 x Digital Camera Dummy Battery
1 x TYPE C to TYPE C Cable

ProductSiteLaunchDate : 2024-06-25T00:00:00.000Z
RecommendedUsesForProduct : Camera
UnitCount : 1
Voltage : 8.4 volts