Cart 2 india

Specification
AgeRangeDescription : adult
Brand : GERRIT
BulletPoint : This item is used and in working condition.
BulletPoint1 : actuator is Small, low cost, low friction model
BulletPoint2 : The Engine Speed Controller is rugged enough to be placed in a control cabinet or engine mounted enclosure with other dedicated control equipment.
BulletPoint3 : Genset Actuator
BulletPoint4 : optimum performance, long life fuel control system results.
BulletPoint5 : 【Effortless Integration, Enhanced Functionality】Seamlessly integrate our power down module into your setup and experience enhanced functionality across various devices. With its user-friendly design and wide-ranging compatibility, elevate your electronics setup with a product engineered for efficiency, safety, and convenience
Color : One Color
ExternallyAssignedProductIdentifier : 7302554135072
ItemName : Generator actuators Generator Actuator 3408326 Fuel Pump Electric Actuator Genset Parts
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : actuator-blocks
Manufacturer : GERRIT
Material : Copper
ModelName : GERRIT
ModelNumber : GERRIT
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : GERRIT
ProductDescription : Generator Set Actuator 24V Genset Actuator Accurate 3408326 for Factory

Feature:
1. Basic Value: The generator set actuator has a voltage of 24V, a response time of 15ms, a voltage of 6 to 15V at no load current of 0.8 to 1.3A, and a voltage of 12 to 18V at full load current of 1.3 to 1.8A.
2. High Accuracy: Our genset actuator has high accuracy, flexible rotation, with quick response time and small clearance.
3. Applicable Scenario: Our genset actuator is suitable for gensets below 300 to 800KW normally closed units, applied in conjunction with normally closed controllers.
4. Aluminum Alloy Material: The generator set actuator is made of aluminum alloy material, which is corrosion proof, excellent finish, high hardness and long service life.
5. Working Environment: This generator set actuator is suitable for working environment with frequent load changes and high requirements for frequency stability.
Specification:
Item Type: Generator Set Actuator
Model: 3408326
Material: Aluminum alloy
Applicable Scenario: Normally closed actuator 3408326 is suitable for 300-800KW normally closed set
Voltage: 24V
Coil Resistance: 22 7.2±0.4Q
Inductance: 120±20 mH
Reacting Time: 15ms
Operating Temperature: 38 7.7, 94 9.6
Maximum Working Temperature: 125 10.6
No Load Current: 6-15V at 0.8-1.3A
Full Load Current: 12-18V at 1.3-1.8A
Package List:
1 x GeneratorSetActuator
Note:
1. The fuel must be clean and the oil filter must be replaced regularly.
2. The loading and unloading must be loosened and tightened according to the specified steps and the sequence of the specified screw position. Each time loading and unloading, replace the new O .
3. Normally open or normally closed actuator must be used with the same way of control panel, otherwise the start can not speed up, or drive to high speed. This has nothing to do with the panel or large base plate.
4. Life and the limits of
ProductSiteLaunchDate : 2024-03-12T07:36:21.779Z
Size : One Size
UnitCount : 0.0353