Cart 2 india

Specification
Brand : SJDYYMX
BulletPoint1 : Function: The 24Vac spring return damper actuator is designed to operate directly driven zone dampers, used to control air flow in ducts.
BulletPoint2 : Electrical Rating: 24 Vac, 60 Hz, 0.32 Amp, 8 VA
BulletPoint3 : Speed Stroke & Rotating Angle: Motor driven 30 sec./ Spring return 6 sec. and 93.5º/ Direction of Shaft Rotation: clockwise, when energized and viewed from the base or shaft end.
BulletPoint4 : Torque Rating: Power open 32 in.oz./ Spring close 32 in.oz.- output torque available when the motor is energized and device is at the spring returned initial start position.
BulletPoint5 : Easy To Install: Direct coupling to 5/16" damper shaft, works well on both NO and NC dampers. Mounting Position: Multi-poise (Tips: it is suggested to use the old long set screw because it will make it easier to tighten the set screw. ).
ConnectorType : Plug-In
ExternallyAssignedProductIdentifier1 : 0797332772629
ExternallyAssignedProductIdentifier2 : 797332772629
IncludedComponents : 1*Damper Actuator Motor
ItemName : Damper Actuator Motor Fit for M847D M847D1004 Old ARD and ZD Series HVAC Zone General Purpose Spring Return 2-Wire Damper Motor Actuator
ItemPackageDimensions_Height : 2.76 inches
ItemPackageDimensions_Length : 4.33 inches
ItemPackageDimensions_Width : 4.33 inches
ItemTypeKeyword : actuator-blocks
Manufacturer : SJDYYMX
ModelNumber : TWA39
NumberOfContacts : 1
NumberOfItems : 1
NumberOfLevels : 1
OperatingVoltage : 12 volts
PartNumber : TWA39
ProductDescription :

Application:

• Fit for M847D, M847D1004, and old ARD and ZD series of damper motors.
• Also replace most 2 wire spring return motors, as well as many other brands.
• !!! Does not work with ZD Rectangular Dampers.

 

Specification:

• Function: 24Vac spring return damper actuator is designed to operate directly driven zone dampers, used to control air flow in ducts.
• Electrical Rating: 24 Vac, 60 Hz, 0.32 Amp, 8 VA.
• Speed Stroke & Rotating Angle: Motor driven 30 sec./ Spring return 6 sec. and 93.5º/ Direction of Shaft Rotation: clockwise, when energized and viewed from the base or shaft end.
• Torque Rating: Power open 32 in.oz./ Spring close 32 in.oz.- output torque available when motor is energized and device is at the spring returned initial start position.
• Easy To Install: Direct coupling to 5/16" damper shaft, works well on both NO and NC dampers. Mounting Position: Multi-poise (Tips: it is suggested to use the old long set screw because it will make it easier to tighten the set screw. ).

ProductSiteLaunchDate : 2024-08-03T01:13:20.801Z
SpecificationMet : CE
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 39120000