Cart 2 india

Specification
Brand : Femotic
BulletPoint : Fits Trane X13612122001 Actuator Rotary 24Volt 50/60HZ 3VA Real OEM
BulletPoint1 : PRODUCT PURPOSE：The 24 volt AC spring return damper is used to directly drive the zoned damper to control the airflow in the pipe.Any two-position switch rated at 24 volts can be used to drive the synchronous motor starter open (or select).An ideal replacement for Honey Well models
BulletPoint2 : WIDE APPLICATIONS：The damper actuator motor is compatible with Honeywell's M847D, M847D1004, and old ARD and ZD series of dampermotors.Does not work with Honeywell ZD Rectangular Dampers. Please check the fitments before ordering
BulletPoint3 : UPGRADED DAMPER ACTUATOR MOTOR：The M847D heavy-duty damper actuator motor is made of stainless steel housing and all-metal gear，rust-proof and long service life.After strict quality testing, more than 150,000 trouble-free operations.Fixed 90 degree operating Angle
BulletPoint4 : EASY INSTALLATION:Direct coupling to 5/16" damper shaft.The hole of the product is ∅8.1-8.2, there is a locking screw next to the lower shaft, which needs to be loosened during installation. It is suggested to use the old Honeywell long set screw because it will make it easier to tighten the set screw
BulletPoint5 : SPECIFICATIONS：Electrical Rating: 24 Vac 60 Hz 0.32 Amp. 8 VA Electrical Connection: 1/2' conduit Nominal Angular Rotation: 90*(max.105%) Torque: Min. 423 mNm (milli newton meter) (60 in.oz) output torque available whenmotor is energized and device is at the spring returned initial sta rt position Nominal Motor Timing: (@ 25°ambient) Energized at rated load: 30 seconds De-energized (spring return): -10 seconds Direction of Shaft Rotation: clockwise, when energized and viewed from the base or shaft end
Color : CN7220A2007 24V 20NM
Department : Unisex Adult
ExternallyAssignedProductIdentifier : 7707654962120
IncludedComponents : M847D1004
ItemName : Damper Actuator Motor Compatible with Honeywell M847D M847D1004,2-Wire Spring Return Damper Actuator Motor Replacement for Old ARD and ZD Series HVAC Zone General Purpose,24 VAC
ItemPackageDimensions_Height : 4.5 inches
ItemPackageDimensions_Length : 3.9 inches
ItemPackageDimensions_Width : 2.9 inches
ItemPackageQuantity : 1
ItemTypeKeyword : actuator-blocks
Manufacturer : Femotic
Material : aluminum
ModelName : UYAAZVHJ
ModelNumber : M847D
NumberOfItems : 1
PartNumber : M847D
ProductDescription : The 2-wire spring-reset damper actuator motor is used to directly drive the zone damper to control the airflow in the duct. Any 24-volt rated two-position switch can be used to drive the synchronous motor starter on (or selected), making it an ideal alternative to the Honey well model! The damper actuator is a replacement for Honeywell's M847D, M847D1004 and older ARD and ZD series damper motors (not for Honeywell ZD rectangular damper). The damper actuator has a stainless steel housing and all-metal gears and has been rigorously tested for quality. The installation is simple and direct, directly connected to the damper shaft, the installation position is diverse!
ProductSiteLaunchDate : 2024-07-16T09:07:20.714Z
Size : One Size
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 31251500
Voltage1 : 230 volts
Voltage2 : 240 volts