Cart 2 india

Specification
Brand : 3M Scotch-Weld
BulletPoint1 : Low odor adhesive is ideal for any setting where harsh fumes or flammability are an issue
BulletPoint2 : Delivers non-sag formulation so adhesive stays where applied
BulletPoint3 : Provides high shear and peel strength and is toughened for impact resistance
BulletPoint4 : 10 minute work life and 20 minute handling strength
BulletPoint5 : Bonds oily metals with minimal surface prep
BulletPoint6 : Bonds most plastics, composites and metals
BulletPoint7 : For industrial/occupational use only. Not for consumer sale or use
Color : Tan
CompatibleMaterial1 : Acrylic
CompatibleMaterial2 : Plastic
CompatibleMaterial3 : Rubber
CompatibleMaterial4 : Alloy Steel
CompatibleMaterial5 : Alloy Steel
CompatibleMaterial6 : Plastic
ExternallyAssignedProductIdentifier : 50021200490847
ExternallyAssignedProductIdentifier1 : 051115716010
ExternallyAssignedProductIdentifier2 : 0051115716010
ExternallyAssignedProductIdentifier3 : 00051115716010
FcShelfLife : 547 days
Hazmat1 : ADHESIVES
Hazmat2 : UN1133
Hazmat3 : II
Hazmat4 : 3
IncludedComponents : Plastic Adhesive
IsExpirationDatedProduct : 1
ItemForm : Liquid
ItemName : 3M Scotch-Weld 49084-case Low Odor Acrylic Adhesive DP810NS, 200 mL, Tan, 6.763 fl. oz. (Pack of 12)
ItemPackageDimensions_Height : 8.5 inches
ItemPackageDimensions_Length : 10.3 inches
ItemPackageDimensions_Width : 6.8 inches
ItemPackageQuantity : 1
ItemTypeKeyword : acrylic-adhesives
ItemVolume : 6.763 fluid_ounces
LiquidVolume : 640 fluid_ounces
Manufacturer : 3M Casepack Ordering
Material : Acrylic
Material1 : Rubber
Material2 : Acrylic
Material3 : Polyethylene
Material4 : Synthetic Rubber
ModelNumber : 49084-case
NumberOfItems : 12
PackageLevel : unit
PartNumber : 49084-case
ProductDescription : Polyethylene Film Tape 5.5 Mil Description: Low density polyethylene film tape. Acrylic and rubber adhesive. Highly conformable. Good abrasion and chemical resistance. Outstanding moisture barrier properties. Acrylic based pressure sensitive adhesive system provides high adhesion and cohesion which yields a permanent bond with virtually no edge bleed out. UV resistant. Excellent long term aging stability without yellowing. Will not crack or crease at low temperatures. 3” plastic core. Application: Water filter purification pipe wrap, protective sealing, splicing, seaming and patching where a highly conformable and optically clear material is required. Physical Properties: Total Thickness 5.5 mil (0.14mm) Tensile strength 11 lbs/in. width Adhesive Synthetic Rubber Elongation (at break) 400% Adhesion to steel 56 oz/in. Operating temperature rangen 50°F to +120°F 8 COLORS AVAILABLE: Optically clear, black, green, orange, red, blue, white & yellow. Alternative to 3M #480; Patco 502A, 503A . Note: The physical properties listed above are typical test results obtained from a series of laboratory tests and should not be used for the purpose of writing specifications. Before using this product, user shall determine the suitability of the product for his/her use; and user assumes all risks and liabilities in connection therewith. All test procedures used are in accordance with ASTM and PSTC methods.
ProductSiteLaunchDate : 2017-05-26T08:00:01.000Z
RecommendedUsesForProduct : Industrial, Mechanical
Size : 3/8"
SpecificUsesForProduct : Prevent Corrosion
StreetDate : 2017-05-26T00:00:01Z
SupplierDeclaredDgHzRegulation : not_applicable
SurfaceRecommendation1 : Plastic
SurfaceRecommendation2 : Paper
SurfaceRecommendation3 : Metal
SurfaceRecommendation4 : Glass
UnitCount : 12
UnspscCode : 31201600
WaterResistanceLevel : waterproof