Cart 2 india

Specification
AgeRangeDescription : Adult
Brand : FAUOSWUK
BulletPoint1 : [Digital Humidity Controller] Ensure accurate and reliable humidity control for various applications.
BulletPoint2 : [Precise Humidity Measurement] High accuracy of 0.1% rh allows for easy reading of data.
BulletPoint3 : [Wide Humidity Range] Measure humidity from 00% to 99% rh, suitable for a variety of environments.
BulletPoint4 : [Simple Panel Operation] Up and down buttons make it easy to set and operate the controller.
BulletPoint5 : [Multi-voltage Selection] Choose from 12v, 24v, or 220v to match your specific voltage needs.
CareInstructions : Wipe Clean
Color : One Color
ExternallyAssignedProductIdentifier : 7619990148147
IncludedComponents : thermometer
ItemLength : 2.5 inches
ItemName : XH W3005 Digital Humidity Controller, Digital Hygrometer Switch Controller with LCD Display 0.1% RH Humidity Sensor 12V/24V/220V (12V)
ItemPackageDimensions_Height : 3 centimeters
ItemPackageDimensions_Length : 12 centimeters
ItemPackageDimensions_Width : 9 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : humidifier-accessories
ItemTypeName : Decoration
Manufacturer : FAUOSWUK
Material : copper
ModelName : URMIBDAI
ModelNumber : FAUOSWUK4zkc9gb8ne-01
MountingType : Wall Mount
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : FAUOSWUK4zkc9gb8ne-01
ProductDescription : Specification:
Model: XH-W3005
Weight: 68g/2.4oz
Input Voltage: 12V, 24V, 220V (Optional)
Humidity Range: 00%~99%RH
Humidity Control : 0.1% RH
Load Power: 120W / 240W / 1500W
Output Type: direct output
Mounting Hole Space: 73mm/2.9inch
Size: 60*45*31mm/2.4*1.8*1.2inch
Operation instructions:
Thermostat connected to the circuit, connected to the power supply, digital tube shows the current humidity setting starting temperature.
Press the up button to display the startup temperature, long press the up button for about 3 seconds, and the startup humidity number flashes, which can be set through the up and down keys.
Set stop humidity:
Press the down button to display the stop humidity, and long press the down button for about 3 seconds to stop the humidity digital flashing, which can be set through the up and down keys
Restore factory Settings:
Under the power on state, press and hold the up and down keys at the same time, the digital tube will display 888 and then automatically to the value of humidity detection, that is, to restore the factory settings.
Package List:
1 x Digital Humidity Controller
Note:
W3005 is a direct output, so please do not power on if the output end is not connected properly or not connected, in case that the two-stage contact spark and careless touch of the wire cause unnecessary trouble.


ProductSiteLaunchDate : 2024-04-18T01:38:42.724Z
Reusability : Reusable
Size : 12V
Style : 12V
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
UnitCount : 1