Cart 2 india

Specification
Brand : Ultimate Washer
BulletPoint1 : 3/8" x 100 FT Dual Braided Grey NON-MARKING Pressure Washer Hose
BulletPoint10 : Note: To avoid hose getting kinked we recommend getting a stainless steel gun swivel. This will extend the life of your accessories.
BulletPoint2 : STAINLESS STEEL: 3/8" Quick Connect Female Coupler 3/8" Quick Connect Male Plug
BulletPoint3 : Hose Connection: 3/8" Male NPT (1 solid & 1 swivel)
BulletPoint4 : Working Pressure: 6000 PSI max. - Burst Pressure: 18000 PSI - Proof Pressure: 12000 PSI. Max Temp: 250° F with Red Bend Restrictor on each end, Max Flow: 8.0 GPM
BulletPoint5 : Rubber construction throughout, with a double layer of tensile steel wire braid, the hose of choice for manufacturers of hot water pressure washers and used by many OEMs at the upper end of the product range. Assembled in USA.
BulletPoint6 : Inner Tube: Water and chemical resistant polyester and polyurethane
BulletPoint7 : Reinforcement: Two layers of high tensile steel braid
BulletPoint8 : Cover: Matte finish TPU provides a lower coefficient of friction
BulletPoint9 : Laminated: Bonded construction for long life
Color : Grey,Red
ConnectorType : Plug
ExteriorFinish : Brass
ExternallyAssignedProductIdentifier : 6425930325353
ExternallyAssignedProductIdentifier1 : 0652401737735
ExternallyAssignedProductIdentifier2 : 652401737735
ExternallyAssignedProductIdentifier3 : 0748296881278
ExternallyAssignedProductIdentifier4 : 0091037514721
ItemDisplayWeight : 34 pounds
ItemName : Ultimate Washer 6000 PSI 3/8" x 100' Grey Pressure Washer Hose w/Stainless Quick Connects
ItemPackageDimensions_Height : 36.322 centimeters
ItemPackageDimensions_Length : 15.748 centimeters
ItemPackageDimensions_Width : 34.798 centimeters
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : pressure-washer-accessories
Manufacturer : Ultimate Washer
Material : Stainless,Stainless Steel,Polyester,Polyurethane,Rubber,Steel
MaximumFlowRate : 2.5 gallons_per_minute
MaximumPressure : 6000 pounds_per_square_inch
ModelNumber : 100949
NumberOfItems : 1
NumberOfPieces : 1
NumberOfPieces1 : 1
NumberOfPieces2 : 4
PartNumber : FHW-PPFT-241120-40112
PowerSourceType : Mechanical
ProductDescription :

• Inner Tube: Water and chemical resistant polyester and polyurethane
• Reinforcement: Two layers of high tensile steel braid
• Cover: Matte finish TPU provides a lower coefficient of friction
• Laminated: Bonded construction for long life
• Color: Grey
• Stainless steel quick-connects for fast hose attachments
• Suitable for Hot or Cold Water cleaning applications. Not safe for use with steam.
• Note: To avoid hose getting kinked we recommend getting a stainless steel gun swivel. This will extend the life of your accessories.
• Max pressure: 6000 PSI
• Do not exceed the maximum pressure, flow or temperature recommended by the factory
• For water volume greater than 8.0 GPM, please switch to 1/2" ID pressure hose.
• Cover: Wrapped finish, “Mark-Less” with embossed lay line
• Permanent heavy duty red bend restrictors on both ends
• Burst (Minimum): 3:1 working pressure
• Impulse Life: 200,000+
• Weight: 33.6 lbs.

ProductSiteLaunchDate : 2022-02-07T20:12:33.516Z
Size : 1"
Style : Above Ground
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
WasherType : Conical Spring
Wattage : 1.4 kilowatts