Cart 2 india

Specification
Brand : Tiny-Clutch
BulletPoint : Price For: Each Pitch: 8mm Gearbelt Type: Hawk Pd Item: Synchronous Drive Gearbelt Material: Compounded Rubber Width: 20mm Number of Teeth: 200 Pitch Length: 1600mm Industry Number: 16008M20 Country of Origin (subject to change): United States
BulletPoint1 : Maximum Torque = 10lbs-in (1.1Nm)
BulletPoint2 : Maximum Speed = 5,000 RPM
BulletPoint3 : 1/4 inch (6.4mm) bore with a set screw and cross hole.
BulletPoint4 : Power may be applied through either the housing or the cam.
BulletPoint5 : Clutch drives clockwise and slips counter clockwise.
ExternallyAssignedProductIdentifier : 7439453949452
ExternallyAssignedProductIdentifier1 : 0044761784052
ExternallyAssignedProductIdentifier2 : 044761784052
IncludedComponents : Unit^Instruction Guide
ItemName : Tiny-Clutch 2871-RH Overrunning Roller Clutch
ItemPackageDimensions_Height : 1 inches
ItemPackageDimensions_Length : 1 inches
ItemPackageDimensions_Width : 1 inches
ItemPackageQuantity : 1
ItemTypeKeyword : industrial-brake-and-clutch-accessories
Manufacturer : Helander Products, Inc.
Material : Plastic
ModelNumber : 2871-RH
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : 2871-RH
ProductDescription : The Tiny-Clutch 2871-RH overrunning roller clutch is a miniature roller and cam type one-way clutch from our D-Series line of clutches. The D-Series clutches are most frequently used to allow a driven member to overrun the input, or for backstopping a load, they can also function to convert oscillating motion to rotary motion. These clutches use our proven cam and roller principle for long life with trouble free performance. The cam, housing and rollers are made of hardened steel and each roller is energized by a spring which is held square and centered in a drilled pocket. The design of the clutch allows for near zero backlash as well as high free-wheeling speeds. The clutch will not jam in the free direction. The 2871-RH overrunning roller clutch is based on our D75 roller clutch. The knurled hub on the housing allows installation of a pulley, gear or sprocket. This clutch drives clockwise and slips counter clockwise, has a 1/4 inch (6.4mm) bore, the cam is screwed and/or pinned to your shaft, and power may be applied to the clutch through either the housing or the cam.
ProductSiteLaunchDate : 2016-11-29T13:34:42.221Z
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 26111500