Cart 2 india

Specification
BatteriesIncluded : 1
BatteriesRequired : 1
Brand : JADPES
BulletPoint1 : High quality digital humidity controller, in use
BulletPoint2 : High measurement accuracy 0.1%, easy to read data
BulletPoint3 : High quality digital humidity controller, in use
BulletPoint4 : Wide measuring range of humidity 00%~99%RH , and wide application fields
BulletPoint5 : Multi-voltage selection: 12V/24V/220V are optional, you can choose voltage according to the purpose
ControllerType : Button Control
ElectricFanDesign : exhaust_fan
ExternallyAssignedProductIdentifier : 3512727607723
ExternallyAssignedProductIdentifier1 : 0884667329199
ExternallyAssignedProductIdentifier2 : 884667329199
IncludedComponents : Digital Humidity Controller
IndoorOutdoorUsage : indoor
ItemName : Jadpes Humidity Control Switch, XhW3005 Digital Hygrometer Switch Controller Humidity Sensor 0~99% Rh 12V/24V/220V Fan Control With Humidity Sensor(220V)
ItemPackageDimensions_Height : 9 centimeters
ItemPackageDimensions_Length : 4.3 centimeters
ItemPackageDimensions_Width : 8 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : humidifier-accessories
Manufacturer : HQRP
ModelNumber : 445815
MountingType : Tabletop
NumberOfItems : 1
PartNumber : 884667803011903
PowerSourceType : Corded Electric
ProductDescription : Specification:
Model: XH-W3005
Weight: 68g/2.4oz
Input Voltage: 12V, 24V, 220V (Optional)
Humidity Range: 00%~99%RH
Humidity Control Precision: 0.1% RH
Load Power: 120W / 240W / 1500W
Output Type: direct output
Mounting Hole Space: 73mm/2.9inch
Size: 60*45*31mm/2.4*1.8*1.2inch

Operation instructions:
Thermostat connected to the circuit, connected to the power supply, digital tube shows the current humidity setting starting temperature.
Press the "up" button to display the startup temperature, long press the "up" button for about 3 seconds, and the startup humidity number flashes, which can be set through the up and down keys.

Set stop humidity:
Press the "down" button to display the stop humidity, and long press the "down" button for about 3 seconds to stop the humidity digital flashing, which can be set through the up and down keys

Restore factory Settings:
Under the power on state, press and hold the up and down keys at the same time, the digital tube will display 888 and then automatically jump to the value of humidity detection, that is, to restore the factory settings.

Package List:
1 x Digital Humidity Controller

Note: 
W3005 is a direct output, so please do not power on if the output end is not connected properly or not connected, in case that the two-stage contact spark and careless touch of the wire cause unnecessary trouble.

ProductSiteLaunchDate : 2022-08-08T00:00:00.000Z
RecommendedUsesForProduct : Exhausting
Style : Modern
SupplierDeclaredDgHzRegulation : not_applicable
SwitchType : Push Button
UpperTemperatureRating : 140 degrees_fahrenheit
Voltage : 220 volts
Wattage : 240 watts