Cart 2 india

Specification
Brand : AMRAP HYDRAULICS
BulletPoint1 : Seal Size: 5.0"Bore x 2.0"
BulletPoint2 : Part Type: cylinder rebuild seal kit
BulletPoint3 : Material : Rubber Plastic
BulletPoint4 : [Application]: Grease zerk assortment kit Grease fitting tool suitable for agricultural machinery, industrial machinery such as tractors, excavators, cranes,harvesters, ships, trucks, automobiles, motorcycles, and other transportation vehicles.
BulletPoint5 : [Sizes & Packing]: Size 3/8"-24 Straight 6pcs, 45 Degree 6pcs, 90 Degree 6pcs. with plastic grease fitting caps.Zerk grease fittings are packed in a good plastic container with a lock for storage you can easily store and find the size you need.
IncludedComponents : Log Splitter Seal Kit 5"Bore
ItemName : Hydraulic Log Splitter Cylinder Rebuild Seal Kit for 5.0"bore X 2.0" Rod
ItemPackageDimensions_Height : 5 inches
ItemPackageDimensions_Length : 5 inches
ItemPackageDimensions_Width : 5 inches
ItemTypeKeyword : hydraulic-cylinder-accessories
Manufacturer : AMRAP HYDRAULICS
Material : Galvanized Steel
ModelNumber : AH5024-LSP-SKT
NumberOfItems : 1
PartNumber : AHLSP-SKT
ProductDescription :

• The seal kit is used to rebuilt Speeco design. To know whether it fits your cylinder, one good way is to disassemble and measure your cylinder to compare with each item specification.
  1. Cylinder tube Bore (I.D.) 4.5" x rod (O.D) 1.75". Please note some cylinder rod head OD size is not rod size.
  2. Wear rings. Piston wear ring : 127 mm (OD 5") x 120.65mm (ID 4.75”) x 9.5mm (0.375" wide), Nylon Rod wear ring : 50.8mm (ID 2") x 57.15mm (OD 2.25”) x 9.5mm (0.375" wide) Nylon
  3. Piston seals 1 square ring and 1 O-ring. Piston Square ring: D127 mm x117mm x 3.28mm; O-ring (installed under the square ring): 115 mm x 2.65 mm . CPU + NBR
  4. Rod O-ring : 50.8mm x 63.5mm x 5mm, CPU. There is O-ring inside.
  5. Rod dust ring : 50.8mm x 60.3mm 5.5mm /7.3mm, TPU
  Below is 5" bore x 2" rod cylinder Specification that OEM made by this seal kit: Retracted (center to center between rod mountain hole and clevis hole: 32.4” Extended (center to center same as above): 56.4”
  Stroke: 24±0.05”
  Dimension from center of clevis hole to back face of cylinder: 2.95” Dimension from center of rod end hole to front face of rod: 1.06” Dimension from center of rod end hole to front face of cylinder: 1.18” Ports: 1/2” NPT Dimension from port to port: 25.4”
  Rod: 2.0" rod Rod end mountain hole: 0.55”
  Clevis Mountain hole: 1.16”
  Dimension between mountain clevis to clevis: 0.87”
  Thickness of each mountain clevis: 0.375”
  Length of each mounting clevis: 4.125”

ProductSiteLaunchDate : 2024-11-13T19:46:18.094Z
Size : 5"Bore
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 18
UnspscCode : 24100000