Cart 2 india

Specification
Brand : TELFAIR
BulletPoint1 : Hydraulic Log splitter cylinder rebuild seal kit for 4.5"Bore x 1.75" rod cylinder
BulletPoint2 : Cylinder tube Bore (I.D.) 4.5" x rod (O.D) 1.75".
BulletPoint3 : Please note: 4.5" bore size is not Cylinder tube O.D. Cylinder rod size is inside tube part size.
BulletPoint4 : Rod O-ring (item 13): 44.5mm x 54mm x 5mm, CPU. There is O-ring inside.
BulletPoint5 : Rod dust ring (Item 12): 44.5mm x 54mm 5.5mm /7.3mm, TPU
ExternallyAssignedProductIdentifier1 : 0679529960241
ExternallyAssignedProductIdentifier2 : 679529960241
FinishType : Powder Coated
FitType : Vehicle Specific
IncludedComponents : Seal Kit
ItemName : Hydraulic Log Splitter Cylinder Rebuild Seal kit for 4.5" Bore x 1.75" Rod Cylinde
ItemPackageDimensions_Height : 7 inches
ItemPackageDimensions_Length : 9 inches
ItemPackageDimensions_Width : 0.5 inches
ItemPackageQuantity : 1
ItemTypeKeyword : hydraulic-cylinder-accessories
Manufacturer : KING AUTOPARTS
ModelName : Hydraulic Ram
ModelNumber : SP0050
NumberOfItems : 1
PartNumber : KINGOT001655NEW FBA
ProductDescription :

Product Description:
Hydraulic Log splitter cylinder rebuild seal kit for 4.5"Bore x 1.75" rod cylinder
To know whether it fits your cylinder, one good way is to disassemble and measure your cylinder to compare with each item specification.
Double check each seal groove is good for our part sitting in.

1. Cylinder tube Bore (I.D.) 4.5" x rod (O.D) 1.75".
Please note: 4.5" bore size is not Cylinder tube O.D. Cylinder rod size is inside tube part size.

2. Wear rings.
Piston wear ring : 114.3 mm (OD 4.5") x 107.95mm (ID 4.25”) x 9.53mm (0.375" wide), Nylon
Rod wear ring : 44.5mm (ID 1.752") x 50.8mm (OD 2”) x 9.53mm (0.375" wide), Nylon

3. Piston seals
1 square ring and 1 O-ring.
Piston Square ring: 114.3 mm x104.3mm x 3.28mm;
O-ring (installed under the square ring): 103mm x 2.65mm. CPU + NBR

4. Rod O-ring (item 13): 44.5mm x 54mm x 5mm, CPU. There is O-ring inside.

5. Rod dust ring (Item 12): 44.5mm x 54mm 5.5mm /7.3mm, TPU

Below is 4.5"Bore x 1.75" rod cylinder Specification that OEM made by this seal kit:
Retracted (center to center between rod mountain hole and clevis hole: 32.4”
Extended (center to center same as above): 56.4”
Stroke: 24 ± 0.05”
Dimension from center of clevis hole to back face of cylinder: 2.95”
Dimension from center of rod end hole to front face of rod: 1.06”
Dimension from center of rod end hole to front face of cylinder: 1.18”
Ports: 1/2" NPT
Dimension from port to port: 25.4”
Rod: 1.75" rod
Rod end mountain hole: 0.55”
Clevis Mountain hole: 1.16”
Dimension between mountain clevis to clevis: 0.87”
Thickness of each mountain clevis: 0.375”
Length of each mounting clevis: 4.125”

Package including:
1 x Cylinder Rebuild Seal kit

ProductSiteLaunchDate : 2024-05-22T06:13:35.623Z
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 31000000
WarrantyDescription : 6 Months Unlimited Warranty