Cart 2 india

Specification
Brand : eletechsup
BulletPoint1 : Working voltage: 5V version(DC 3.7-5.5V);
BulletPoint2 : Working current: 7-13MA
BulletPoint3 : Adapted sensor: SHT30 temperature and humidity sensor
BulletPoint4 : Temperature measurement range: -40-125℃ (Because the shell and wire are not resistant to high temperature, please use it in the environment of -40-80℃)
BulletPoint5 : Humidity measurement range: 0-100%RH Accuracy: ±0.2℃; ±2%RH
Color : As Shown
ExternallyAssignedProductIdentifier : 4714106666058
ExternallyAssignedProductIdentifier1 : 0749079581453
ExternallyAssignedProductIdentifier2 : 749079581453
IncludedComponents : Module
ItemName : eletechsup -40-125Celsius 0-100% RH SHT30 SHT3X RS232 TTL Modbus Rtu Digital Temperature Humidity Sensor Module (with pin)
ItemPackageDimensions_Height : 5 centimeters
ItemPackageDimensions_Length : 7 centimeters
ItemPackageDimensions_Width : 5 centimeters
ItemPackageQuantity : 1
ItemShape : With Pin
ItemTypeKeyword : humidifier-accessories
Manufacturer : eletechsup
Material : plastic
ModelName : Zeronevm67krb849
ModelNumber : SHA8C01_232_5V
NumberOfItems : 1000
PartNumber : SHA8C01_232_5V_Blue_GND
ProductDescription : 1. 2?3 pole terminal 2.5mm² wire, 1 is the fire line input line, 2 is the neutral line output line, supports 12?250V wide voltage input.
2. Back rail slot for easy attachment to 35mm rails.
3. PC material case has high?quality heat resistance, high impact resistance and other physical and mechanical properties.
4. Excellent electrical insulation, elongation, dimensional stability and chemical resistance. High strength.
5. The purpose of the mechanical humidity controller MFR012 is to control the electric heating so that the dew point raises the relative humidity by more than 65% at a crucial time. In this way, condensation and are effectively prevented.

Spec:
Item Type:Humidity Controller
Technical Data: 4% Relative Humidity (± 3% Tolerance)
Allowable Air Flow Rate: 15m/Sec
Contact Type: Conversion Contact
Contact Resistance: < 10mOhm
Service Life : >100 000 Cycles
Exchange Capacity: 20VAC/DC100mA
Voltage And Current: 250 VAC, 5 (1) A250V 5(1)A
DC 20WDDC 20W
Electro Magnetic Compatibility : EN 61000-3-2, EN 61000-3-3 55014-1-2
Connection: 1.5mm 2 - 3-pole terminal 2.5mm², clamping torsion 0.5Nm highest: wire 2.5mm², steel strand (end ferrule with wire) 1.5mm²
Installation: 35mm DIN rail, EN50022
Housing: Plastic according to UL94 V - 0, light gray
Size:67 x 50 x 38mm / 2.64 x 1.97 x 1.5in
Weight: 60 g / 2.12 oz(approx.)
Operating/Storage Temperature: 0 To +60°C (+32 To +140°F) / -20 To +80°C (-4 To +176°F)
Type : IP20
Approval: CE
* At 50% Relative Humidity

Package List:
1 x Humidity Controller

Notice:
Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.

ProductDescription1 :

Product Name: -40-125Celsius 0-100%RH SHT30 SHT3X RS232 TTL Modbus Rtu Digital Temperature Humidity Sensor Module

 

 

 

Packing list:

TTL232 Temperature and humidity collector Board

 

Description :

SHA8C01 RS485 SHT30 Acquisition module Description:

Working voltage: 5V version(DC 3.7-5.5V); 

Working current: 7-13MA

MODBUS RTU protocol, 03 read command, 06 write command.

Serial port baud rate: 9600 (default), N, 8, 1

By modifying the 485 address, up to 247 modules can be cascaded (more than 16 please use R485 repeater)

Adapted sensor: SHT30 temperature and humidity sensor

Temperature measurement range: -40-125℃ (Because the shell and wire are not resistant to high temperature, please use it in the environment of -40-80℃)

Humidity measurement range: 0-100%RH Accuracy: ±0.2℃; ±2%RH

ProductDescription2 :

Size: 30 X 15 X 5.8MM

Weight: 2g

SHT30 sensor specifications:

Product model: TB446 SHT30

Working voltage: 2.5-5.5V DC

Output signal: IIC digital signal

Output interface: XH2.54 4P terminal block

Temperature measurement range: -40-125℃ (Because the shell and wire are not resistant to high temperature, please use it in the environment of -40-80℃)

Humidity measurement range: 0-100%RH

Accuracy: ±0.2℃; ±2%RH

IIC address: 0X44

Wire length: 30 cm

Weight: 15 grams

Shell material: ABS

 

 

Typical application:

 

Temperature and humidity controller

Industrial Systems

Consumer Products

Thermometers

Thermally Sensitive Systems

Indoor and outdoor temperature measurement

Temperature in vegetable garden

Weather forecasting, and monitoring

Temperature and humidity in Computer Room

Warehouse temperature and humidity

ProductSiteLaunchDate : 2018-08-14T21:00:00.000Z
Size : D
Style : Modern
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
Voltage : 1 volts