Cart 2 india

Specification
Brand : Jerys
BulletPoint1 : The maximum load current of the thermostat is 10A, and the output type is direct output,and the installation hole pitch is 73mm.
BulletPoint2 : Digital humidity controller is more intelligent and convenient to use, and humidity control is more flexible.
BulletPoint3 : This input voltage of the digital humidity control switch is 100 to 220V, and the load power is 1500W.
BulletPoint4 : High accuracy, the measurement accuracy of this humidity controller is as high as 0.1%, and the data is easy to read.
BulletPoint5 : High accuracy humidity sensor has two buttons up and down, which is very easy to set up and operate.
ExternallyAssignedProductIdentifier : 7042353109828
ItemName : Digital Humidity Controller, Humidity Control Switch Easily Operate High Accuracy for Greenhouse Mushroom Grow
ItemPackageDimensions_Height : 5 centimeters
ItemPackageDimensions_Length : 10 centimeters
ItemPackageDimensions_Width : 8 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : humidifier-accessories
Manufacturer : Jerys
Material : plastic
ModelName : Jeryso6bw70rz5k
ModelNumber : Jeryso6bw70rz5k
MountingType : Tabletop
NumberOfItems : 1
PartNumber : Jeryso6bw70rz5k
ProductDescription : 1. High accuracy, the measurement accuracy of this humidity controller is as high as 0.1%, and the data is easy to read.
2. Digital humidity controller is more intelligent and convenient to use, and humidity control is more flexible.
3. High accuracy humidity sensor has two buttons up and down, which is very easy to set up and operate.
4. This input voltage of the digital humidity control switch is 100 to 220V, and the load power is 1500W.
5. The maximum load current of the thermostat is 10A, and the output type is direct output,and the installation hole pitch is 73mm.

Spec:
Item Type: Digital Humidity Controller
Material: ABS Plastic
Model: XH-W3005
Input Voltage: 100 to 220V
Load Power: 1500W
Maximum Load Current: 10A
Output Type: Direct Output
Installation Hole Distance: Approx.73mm / 2.9in
Accuracy: 0.1%RH
Humidity Measurement Range: 00% to 99%

How to Use:
Connect the thermostat to the circuit, turn on the power, the digital tube displays the current humiditySet the starting temperaturePress the up key to display the start humidity, press and hold the up key for about 3 seconds, the start humidity number will flash, which can be set by the up and down keysSet stop humidityPress the button to display the stop humidity, press and hold the button for about 3 seconds to stop the flashing of the humidity number, which can be set by the up and down keysResetIn the power on state, press the up and down keys at the same time, the digital tube will display 888, and then automatically to the value of the detected humidity, that is, restore the factory settings

packing list:
1 xDigital Humidity Controller

Note:
The product is a direct output, so in the output end is not connected or not connected, do not electrification, in order to prevent two levels of wire contact and ignition and careless touch to bring unnecessary trouble

ProductSiteLaunchDate : 2023-05-13T22:38:14.493Z
Size : 12V
Style : Industrial
UnitCount : 1
Voltage : 12 volts