Cart 2 india

Specification
Brand : DR.ONIC
BulletPoint1 : Fits the vertical wall vents only
BulletPoint2 : Eco-Friendly and Green Humidifier
BulletPoint3 : Works without electricity
BulletPoint4 : Silent operation
BulletPoint5 : Very low maintenance
Capacity : 95 liters
Color : White
ControlMethod : touch
ExternallyAssignedProductIdentifier1 : 0627843312864
ExternallyAssignedProductIdentifier2 : 627843312864
ExternallyAssignedProductIdentifier3 : 757686658154
ExternallyAssignedProductIdentifier4 : 654936820296
ItemName : Digital Humidity Chamber Apparatus, Humidity Cabinet Machine, Heating & Cooling Chamber Apparatus with Automatic ON-Off Feature (110-240V)
ItemPackageDimensions_Height : 10 centimeters
ItemPackageDimensions_Length : 20 centimeters
ItemPackageDimensions_Width : 15 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : humidifier-accessories
Manufacturer : Onic Enterprises
Material : Polyrethane
ModelNumber : Vetus
MountingType : Tabletop
NumberOfItems : 1
PartNumber : HTCL-852i
PowerSourceType : Corded Electric
ProductDescription : ISO CE Humidity Cabinet General specification as made out of stainless steel. The temperature can be controlled from 5 C to 50 C 2C and humidity from 45% to 90% 5% RH Temperature below ambient is controlled by hermetically sealed compressor complete with accessories provided below the unit. Two stainless steel water reservoirs heated by immersion heaters are provided to create humidity. Complete with all accessories. Control panel provided with control switches and indicators. The Digital Temp. controlled the temperature before 15 to 20 as the set temperature and temperature will be increase or decrease slowly and maintain it on highest point as your requirement. The Humidity controlled the humidity before 20 to 30 as the set humidity and humidity will be increase slowly and maintain it on highest point as your requirement. 2. Zero Offset Adjust - Rotate the HUM SET ADJ control to its fully counterclockwise position (0% R.H.). Adjust R6 so that the voltage measured at U2-6 is 0.000 .001 Volts. Use the + lead on C6 as a ground point. 6.1 Humidity Controller 3. Full Scale Calibration - Adjust the HUM SET ADJ control to its fully clockwise position (100.0% R.H.). Adjust R4 so that the voltage measured at U2-3 is +5.00 .01 Volts. 4. Display 100% Point Calibration - Depress the READ/SET switch and observe the Display reading. Adjust R28 so that the Display indicates 100.0% R.H. a) 455 x 455x 455 mm 95 ltrs.
ProductSiteLaunchDate : 2018-04-27T07:00:00.000Z
RoomType1 : Living Room
RoomType2 : Bedroom
Size : Medium
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1