Cart 2 india

Specification
Brand : Hyuduo
BulletPoint : 20 Pcs 6x9x13mm Motor Fibre Carbon Brushes
BulletPoint1 : 【DC Gear Motor】Abrasion‑resistant, quiet with long life metal gears, possess small size, large torsion, ultra quiet, stable .Pure copper coil stator and rotor, strengthen deceleration and conductivity, so that the motor torsion is increased.
BulletPoint2 : This gear motor uses all metal gears, wear-resistant, quiet and life of a good process.
BulletPoint3 : Safety: The motor has overload current which can it to avoid burning out during the use of the motor and increase the service life of the motor.
BulletPoint4 : Treatment Of Floor Motor: Because the magnetic tile is a brittle material, the DC motor may break the magnetic tile once it falls, causing the motor to block and cause burns. Please do not use the motor after it has landed at a high altitude.
BulletPoint5 : This gear motor uses a pure copper coil to enhance reduce and electrical conductivity, and the motor is reversed.
ExternallyAssignedProductIdentifier1 : 0763704405358
ExternallyAssignedProductIdentifier2 : 763704405358
FinishType : Finish
IncludedComponents : inc
ItemName : DC Motor Gear Motor 24V DC Reduction Motor Bracket Governor Gear Low Speed for CNC Machine Tool Measuring Instruments Electricmotor (100rpm/min)
ItemPackageDimensions_Height : 5 centimeters
ItemPackageDimensions_Length : 15 centimeters
ItemPackageDimensions_Width : 5 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : motor-accessories
Manufacturer : Hyuduo
Material : Metal
ModelName : Hyuduo0qwsfxkiua-11
ModelNumber : Hyuduo0qwsfxkiua-11
NumberOfItems : 1
PartNumber : Hyuduo0qwsfxkiua-11
PowerSourceType : PowerSource
ProductDescription : Specification:




Item Type: DC Reduction Motor
Model: XD-37GB520
Material: Copper
Output Shaft Size: Approx. 6 x 15mm / 0.2 x 0.6in
Insulation Resistance: After the rated of the motor under normal temperature and humidity, when measuring the insulation between the coil and the motor shell with a DC500V meter, it does not exceed 20M?
Insulation Withstand Voltage: After the rated of the motor under normal temperature and humidity, 50Hz or 60Hz is applied between the coil shells for one minute, and the abnormality is 1500V.
Temperature Rise: It is normal to install a or equivalent heat sink and conduct rated under normal temperature and humidity by using the to measure the temperature rise of the coil below 70.
Insulation Class: Class B(130)
Operating Environment Temperature: Motor: -10~+40 (no icing)
Use Environment Humidity: 85% or less (no condensation)
CW/CCW: Yes
Speed Adjusted: Yes
Governor Voltage: DC12-24V
Speed Adjustment Range:
Gear Model: CN1001
Gear Center Hole: Approx. 6mm / 0.2in
Model Voltage(DC/V) No-Load speed(rpm/min) No-Load current(A) Load speed(rpm/min) Load torsion(kgf·cm) Load current(A) Power(W) XD-37GB520 24V 100 0.09 93 1.17 0.36 5 150 0.09 128 0.78 0.36 5 200 0.09 175 0.58 0.36 5 300 0.09 245 0.39 0.36 5 500 0.09 435 0.23 0.36 5 600 0.09 535 0.19 0.36 5






Package List:
1 x Motor
1 x Bracket
1 x Speed Control Box
10 x Screw
1 x Gear
1 x Hex Wrench
2 x Small Screw

ProductSiteLaunchDate : 2023-12-23T00:00:00.000Z
Size : 100rpm/min
Speed : 100 rpm
UnitCount : 1
UnspscCode : 26101200