Specification Brand : Dema BulletPoint1 : Schieffer hose uses a reinforcement construction composed of one extra strong layer of textile braid BulletPoint2 : One layer of 1/8" high tenacity polyester textile braid that is chemically bonded BulletPoint3 : Black thermoplastic polyurethane that is oil, weather, ozone, and abrasion resistant BulletPoint4 : Pin test each crimp to confirm proper internal crimp BulletPoint5 : ISO 9001 Certified and Proudly Made in the USA Color : Black ExternallyAssignedProductIdentifier1 : 0853283005008 ExternallyAssignedProductIdentifier2 : 853283005008 ItemDisplayDimensions_Length : 16 inches ItemDisplayWeight : 29 pounds ItemName : Cyclone Portable Injector by Dema P203CTC.PI.3 ItemPackageDimensions_Height : 5 inches ItemPackageDimensions_Length : 11 inches ItemPackageDimensions_Width : 11 inches ItemPackageQuantity : 1 ItemTypeKeyword : pressure-washer-accessories Manufacturer : Schieffer Co. Material : Polyester MaximumPressure : 4000 pounds_per_square_inch ModelNumber : P203CTC.PI.3 NominalWallThickness : 1.3 month PartNumber : P203CTC.PI.3 ProductDescription : The Cyclone Portable Chemical/Fertilizer Injector Kit includes the unit, a complete metering tip kit, pick-up hose, strainer, ceramic weight and stainless hanger. This injector can be used for residential and commercial drip irrigation systems and a wide variety of other areas requiring chemical injection.Features:Made of polypropylene and Kynar (PVDF) chemically resistant materials, designed for years of useFlow rate 3.5 GPM at 40 PSI, will induct 12.8 ounces per gallon (no tip)Includes 13 metering tips designed for the most popular chemicals, tips allow dilution rates between 10:1 - 512:1Capable of 150 GPH at 40 PSI and 15 gallons of chemical injection (no tip)Inlet and outlet fittings are brass 3/4" GHT(Garden Hose Threads)Extreme chemical resistanceCheck valve includes Teflon ball, Viton o-ring and Hastelloy spring so it can be used with Chlorine and other harsh chemical applications Injector starts drawing chemical with water pressure as low as 25 PSI inlet pressureMax induction achieved at 35 PSIMade in USAPlease Note: Locally approved back flow prevention device is required for any shared water source. ProductSiteLaunchDate : 2014-08-19T17:09:53.200Z Size : 3/8 in. SupplierDeclaredDgHzRegulation : not_applicable UnitCount : 1