Cart 2 india

Specification
Brand : ARMOR TOOL
BulletPoint : Price For: Each Finish: Plain Item: Machine Key Material: Steel Application: Holds Pulleys and Gears on Transmission Shafts Type: Undersized Thickness Tolerance: -0.002" Tensile Strength (PSI): 64, 000 psi Length Tolerance: -0.030" Length: 1-3/4" Rockwell Hardness: B85 Square: 3/16" End Type: Square Country of Origin (subject to change): United States
BulletPoint1 : AMZ Product Type - Spare & Replacement Parts
BulletPoint2 : Core height 20 inch
BulletPoint3 : Core width 19 inch
BulletPoint4 : Made in Turkey
BulletPoint5 : Milford Rivet Part # SH152
Color : Silver
ExternallyAssignedProductIdentifier : 7439453949452
ExternallyAssignedProductIdentifier1 : 888569004178
ExternallyAssignedProductIdentifier2 : 0888569004178
FinishType : Powder Coated
IncludedComponents : Unit^Instruction Guide
ItemName : Armor AL66774 Radiator Fits 2250, 2250 F, 2450, 2450 F, 2650, 2650, Aluminum
ItemPackageDimensions_Height : 12 inches
ItemPackageDimensions_Length : 20 inches
ItemPackageDimensions_Width : 20 inches
ItemPackageQuantity : 1
ItemTypeKeyword : industrial-brake-and-clutch-accessories
Manufacturer : Armor
Material : Aluminum
ModelNumber : AL66774
NumberOfBoxes : 1
NumberOfItems : 1
OperationMode : Mechanical
PartNumber : AL66774
ProductDescription : The Tiny-Clutch 1808-LH backstopping roller clutch is a miniature roller and cam type one-way clutch from our D-Series line of clutches. The 1808 clutches are most frequently used for backstopping a load, or converting oscillating motion to rotary motion. These clutches use our proven cam and roller principle for long life with trouble free performance. The cam, housing and rollers are made of hardened steel and each roller is energized by a spring which is held square and centered in a drilled pocket. The design of the clutch allows for near zero backlash as well as high free-wheeling speeds. The clutch will not jam in the free direction. The 1808-LH backstopping roller clutch is based on our D125MR clutch, featuring an arm that allows the housing to be fixed to ground for backstopping applications or can be used as the input for oscillating applications. This clutch drives counter clockwise and slips clockwise, has a 1/2 inch (12.7mm) bore, the cam is screwed to your shaft with two screws at 180 degrees, power may be applied to the clutch through either the arm or the cam. This is the original equipment clutch in Milford Rivet model 63 and model 64 rivet machines and replaces Milford Rivet Part # SH152.
ProductSiteLaunchDate : 2017-07-23T08:00:01.000Z
StreetDate : 2017-07-23T00:00:01Z
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 25170000