Cart 2 india

Specification
Brand : Ongniong
BulletPoint1 : Strong Durability -- This hydraulic cylinder puller is made of #45 steel with good corrosion and wear resistance, more durable and able to be used for a long time.
BulletPoint2 : High Efficiency -- The maximum pulling force can reach 15T, even the ultra-thin wall can also be easily pulled out.
BulletPoint3 : Fit for -- This cylinder liner puller is suitable for any model with the inner diameter of the cylinder liner between 80-135mm, both dry and wet types are available.
BulletPoint4 : Easy to Operate -- This universal cylinder puller is ergonomically designed with a press rod, easy to operate without much effort, saving your time and energy.
BulletPoint5 : Wide Application -- This cylinder liner puller is easy to install, used for the disassembly of the internal combustion engine and cylinder liner.
BulletPoint6 : Rod Wiper: Heavy-duty wiper
BulletPoint7 : All cylinders are 1.5 times pressure tested
Color : red
CompatibilityOptions : any model with the inner diameter of the cylinder liner between 80-135mm
CompatibleWithVehicleType : Tractor, Truck, RV
ExternallyAssignedProductIdentifier1 : 0783970179470
ExternallyAssignedProductIdentifier2 : 783970179470
FinishType : Powder Coated
IncludedComponents : 1* Cylinder Puller, Other Accessories for Use
IsAssemblyRequired : 1
ItemName : 15T Hydraulic Cylinder Puller, Universal Cylinder Liner Puller Dry&Wet Types Fit, Hydraulic Cylinder Sleeve Liner Puller Tool for Disassembly of Internal Combustion Engine-Inner Diameter 80-135mm
ItemPackageDimensions_Height : 5.5 inches
ItemPackageDimensions_Length : 25 inches
ItemPackageDimensions_Width : 7.5 inches
ItemPackageQuantity : 1
ItemTypeKeyword : hydraulic-cylinder-accessories
Manufacturer : BOBBINN
Material : #45 Steel
ModelName : 15T Hydraulic Cylinder Puller
ModelNumber : 15T Hydraulic Cylinder Puller
NumberOfItems : 1
PartNumber : 15T Hydraulic Cylinder Puller
ProductDescription :

How to Use

1. According to the model you need to disassemble, choose the pull plate and connecting rod (the connecting rod is divided into two lengths). 2. Connect the connecting rod with the cylinder lifter, the steering knuckle and the pull plate.3. Twist the steering knuckle of the cylinder puller to a right angle with the connecting rod. The straight side of the pull plate is parallel to the connecting rod and passes through the cylinder liner so that the small diameter of the pull plate is locked into the inner diameter of the cylinder liner.

4. Sleeve the two support tubes onto the diagonal cylinder head screws.

5. Pass the beam of the cylinder puller into the slideway of the lifting gear, and put both ends of the beam into the groove of the support tube.

6. Screw the hydraulic assembly into the lifting gear (pay attention to the center hole on the beam) and tighten it. 7. Check whether the pull plate, beam and support tube are accurately positioned. 8. Transport the small plug of the hydraulic assembly with a pressure rod, and the cylinder sleeve can be pulled out smoothly.

Specification

Max. Pulling Force: 15T

Material: #45 Steel

Maximum Stroke (Piston Push Rod): 5cm/1.97in

Weight: 18kg/39.68lbs

Package Included

1* Cylinder Puller

Other Accessories for Use

Notes

The extension of the cylinder push rod must not exceed 50mm.

ProductSiteLaunchDate : 2023-11-17T20:38:13.198Z
Size : 32.48in
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 25170000
WarrantyDescription : If you have any problem when receiving the item, We will try our best to solve the problem for you.