Cart 2 india

Specification
Brand : EC Buying
BulletPoint : DIMS:3/4"H X 2 3/4"W X 4 1/2"L
BulletPoint1 : Overview ：SHT31-DIS is the next generation of Sensirion' s temperature and humidity sensors. It builds on a new CMOSens sensor chip that is at the heart of Sensirion’s new humidity and temperature platform.The SHT31-DIS has increased intelligence, reliability and improved accuracy specifications compared to its predecessor. Its functionality includes enhanced signal processing, two distinctive and user selectable I2C addresses and communication speeds of up to 1 MHz.
BulletPoint2 : Features: SHT31-DIS features a fully calibrated, linearized, and temperature compensated digital output, with a supply voltage range of 2.4 V to 5.5 V. SHT31-DIS has I2C interface, communication speed up to 1 MHz, and two user selectable addresses. Typical accuracy is ± 2% relative humidity and ± 0.3 ° C. It has very fast startup and measurement time.
BulletPoint3 : Alarm reimbursement: the alarm pin can be connected to the interrupt pin of the microcontroller. The output of the pin depends on the RH/T reading value relative to the programmable limit. Its functions are explained in a separate application description. If not used, this pin must remain floating. When the alarm condition is met, the pin switch is high. Note that self heating may occur depending on the current. If the alarm pin is only used to switch transistors, it can prevent self heating.
BulletPoint4 : Reset by general call: In addition, according to I2C bus specification 12, the sensor can be reset using the "general call" mode. This will generate a reset with the same function as using the nReset pin. It is important to understand that resets generated in this way are not device specific. All devices supporting universal call mode on the same I2C bus will perform reset. In addition, this command is only valid if the sensor can process the I2C command.
BulletPoint5 : ADDR pin: I2C address can be selected through proper wiring of ADDR pin. In addition to hardwiring the ADDR pin to VDD or VSS, it can also be used as a selector pin. This means that the sensor address can be changed dynamically during operation by switching the level on the ADDR pin. The only limitation is that the level must be kept constant from the I2C start condition until the communication is completed. This allows more than two SHT3x DISs to be connected to the same bus.
Color : black
ConnectivityTechnology : I2C
ConnectivityTechnology1 : I2C
ConnectivityTechnology2 : USB
ControlMethod : touch
ExternallyAssignedProductIdentifier1 : 0723651976561
ExternallyAssignedProductIdentifier2 : 723651976561
Hazmat1 : LITHIUM ION BATTERIES CONTAINED IN EQUIPMENT
Hazmat10 : CN_SmallLithiumIonBatteryInEquipment
Hazmat11 : DE_SmallLithiumIonBatteryInEquipment
Hazmat12 : EG_SmallLithiumIonBatteryInEquipment
Hazmat13 : ES_SmallLithiumIonBatteryInEquipment
Hazmat14 : FR_SmallLithiumIonBatteryInEquipment
Hazmat15 : GB_SmallLithiumIonBatteryInEquipment
Hazmat16 : IN_SmallLithiumIonBatteryInEquipment
Hazmat17 : IT_SmallLithiumIonBatteryInEquipment
Hazmat18 : JP_SmallLithiumIonBatteryInEquipment
Hazmat19 : MX_SmallLithiumIonBatteryInEquipment
Hazmat2 : UN3481
Hazmat20 : NL_SmallLithiumIonBatteryInEquipment
Hazmat21 : PL_SmallLithiumIonBatteryInEquipment
Hazmat22 : SA_SmallLithiumIonBatteryInEquipment
Hazmat23 : SE_SmallLithiumIonBatteryInEquipment
Hazmat24 : SG_SmallLithiumIonBatteryInEquipment
Hazmat25 : TR_SmallLithiumIonBatteryInEquipment
Hazmat26 : US_SmallLithiumIonBatteryInEquipment
Hazmat27 : ZA_SmallLithiumIonBatteryInEquipment
Hazmat3 : II
Hazmat4 : 9
Hazmat5 : AE_SmallLithiumIonBatteryInEquipment
Hazmat6 : AU_SmallLithiumIonBatteryInEquipment
Hazmat7 : BE_SmallLithiumIonBatteryInEquipment
Hazmat8 : BR_SmallLithiumIonBatteryInEquipment
Hazmat9 : CA_SmallLithiumIonBatteryInEquipment
IncludedComponents : OE217-03-G
ItemName : 000 EC Buying SHT31-D Coolant-temperature sensors FT200XD USB to I2C Module IIC Port TTL Level Input CMOS Output
ItemPackageDimensions_Height : 15.367 centimeters
ItemPackageDimensions_Length : 0.0508 centimeters
ItemPackageDimensions_Width : 10.287 centimeters
ItemPackageQuantity : 2
ItemTypeKeyword : humidifier-accessories
Manufacturer : EC Buying
Material : Ceramic
ModelName : SHT31-D
ModelNumber : SHT31-D
MountingType : Wall Mount
NumberOfItems : 1
PartNumber : SHT31-D
ProductDescription : Description: SHT31-DIS is the next generation of Sensirion' s temperature and humidity sensors. It builds on a new CMOSens sensor chip that is at the heart of Sensirion’s new humidity and temperature platform.The SHT31-DIS has increased intelligence, reliability and improved accuracy specifications compared to its predecessor. Its functionality includes enhanced signal processing, two distinctive and user selectable I2C addresses and communication speeds of up to 1 MHz.
The DFN package has a footprint of 2.5 x 2.5 mm2 while keeping a height of 0.9 mm. This allows for integration of the SHT31-DIS into a great variety of applications. Additionally, the wide supply voltage range of 2.4 V to 5.5 V guarantees compatibility with diverse assembly situations. All in all, the SHT31-DIS incorporates 15 years of knowledge of Sensirion, the leader in the humidity sensor industry.
ProductSiteLaunchDate : 2022-10-31T03:15:26.093Z
RoomType : Bedroom
Size : 65% RH (50 Packs)
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
Voltage : 5 volts
WebsiteShippingWeight : 0.295 kilograms
WirelessCommStandard : bluetooth