Cart 2 india

Specification
Brand : Generic
BulletPoint1 : 【 Card type 】 The reader support EM-ID card or MI-IC card ,please choose one of you need before purchase. (does not support HID, Cobra, APCiK, etc.)
BulletPoint2 : 【 Baud rate 】Communication baud rate 9600.N.8.1
BulletPoint3 : 【 Communication format 】RS232, RS485,Wiegand26/34 and other communication specifications meet your needs
BulletPoint4 : 【 Wiegand switching 】Just shorten or dangle the WG line to ground. Wiegand 26 or 34 switching can be realized
BulletPoint5 : 【 Waterproof design 】With an outdoor protection rating of IP68, you can rest assured that this reader will withstand all outdoor conditions.
BulletPoint6 : 【 ID/IC Card 】 Supports 125Khz EM-ID or 13.56Mhz M1 cards, suitable for various radio frequency identification scenarios
Color : Green
ExternallyAssignedProductIdentifier : 8775871662092
IncludedComponents : Attached instruction manual
ItemName : EM/M1 RF Card Reader, Wiegand Access Control Card Reader, RS485, RS232, TTL Frequency Communication, Suitable for Access Control Systems (HGL-101, Wiegand26 or 34 Format, 13.56MHZ)
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 9 centimeters
ItemPackageDimensions_Width : 8 centimeters
ItemPackageQuantity : 1
ItemShape : Square
ItemTypeKeyword : access-control-keypads
Manufacturer : HEYGLI
ModelName : CRNKJ10889
ModelNumber : HGL-101
NumberOfBoxes : 1
NumberOfItems : 1500
PartNumber : 13.56MHZ
ProductDescription : Product parameters
Applicable models : RF card reader
Operating Frequency : 125Khz , 13.56Mhz
Sensing distance : 3 - 15CM
Operating voltage : DC 9V - 16V
Working current : 50mA
Card reading speed : 0.2S
Output format : RS485, RS232,Wiegand 26 or 34, TTL frequency
Transmission distance : RS232(10 meters), RS485 (1200 meters), WG (100 meters)
Shell material : PVC and spray molded interior can be filled with black resin adhesive (effectively waterproof)
Installation precautions
1.The line from the card reader to the controller: it is recommended to use 8 cores to shield the multi-strand twisted pair network cable (of which 2 cores are spared, if the reader lamp feedback legal card can not be connected to the LED line, if the buzzer feedback illegal card can not be connected to the Buzzer line without the card reader's buzzer), the data line Data1 Data0 is a pair of twisted pairs. The wire diameter is recommended to be more than 0.3 square millimeters. The maximum length may not exceed 100 meters. The shield is connected to the GND of the controller.
2. The standard reading distance of the card reader is 5-15cm, the ID card reader reading distance is slightly longer, and the IC card reading distance is slightly shorter. If a keychain type proximity card is used, the reading distance will be shorter, generally 1-3 cm. The way to read the card, it is recommended to use the card directly facing the reading card to naturally approach, the card reading method with the card quickly swiped from the side is not advisable, and does not guarantee the success of the card.
3. The card reader is installed on the metal surface. Since the card reader is a RF product, the metal pair near the front or rear will absorb its RF signal. If the metal surface is large, it may even affect the card reader's ability to read the card, or the card reader's Distance decay is very severe.
ProductSiteLaunchDate : 2023-11-06T00:36:38.110Z
Size : One Size
Style : Wiegand26 or 34 format
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
WarrantyDescription : No Warranty