Cart 2 india

Specification
Brand : KEAUTE
BulletPoint : This is a genuine OEM (Original Equipment Manufacturer) part.
BulletPoint1 : The card reader supports 125KHz ID card or 13. 56Mhz IC card, please choose the card reader you need before purchasing.
BulletPoint2 : Communication baud rate 9600.N.8.1, please contact customer service for other baud rates
BulletPoint3 : Ultra-thin metal password swipe RF card reader
BulletPoint4 : The module comes with a single-chip microcomputer (MCU), serial communication, simple hardware connection, and any platform with a serial port can be used.
BulletPoint5 : RS232, RS485, TTL level communication is optional, and functions can be customized according to your needs.
Color : Black
ExternallyAssignedProductIdentifier1 : 0764938433032
ExternallyAssignedProductIdentifier2 : 764938433032
IncludedComponents : Wristband
ItemName : 13.56Mhz IC Password Swipe RF Card Reader RS485 RS232 TTL Level Communication DC5V 9-16V 24V Wide Voltage Ultra-Thin Metal 125Khz ID contactless Swiping (13.56Mhz, RS232, DC 9~16V)
ItemPackageDimensions_Height : 3 inches
ItemPackageDimensions_Length : 10.5 inches
ItemPackageDimensions_Width : 7 inches
ItemPackageQuantity : 1
ItemTypeKeyword : access-control-keypads
Manufacturer : KEAUTE
ModelNumber : 13.56Mhz
NumberOfBoxes : 1
NumberOfItems : 2000
PackageLevel : unit
PartNumber : DC 9~16V
ProductDescription :
Product parameters
Product name： Metal RF card reader
Material： Zinc alloy frame, tempered glass panel
Frequency： 125Khz or 13.56Mhz
Card reading type： TK4001/ EM4100 etc.
Read Range： 3~15CM
Operating Voltage： DC 5V、DC 9V ~ 16V、DC 24V
Interface method： RS485, RS232, TTL level and other formats are optional
Operating Temperature： -25℃ ~ 85℃
Verification method： Swipe card verification , Password authentication
Communication distance： RS232 interface≤10m, RS485 interface≤1200m (recommended within 800m)
Matters needing attention
1.The standard reading distance of the card reader is 5-15cm, the reading distance of the ID card reader is slightly longer, and the reading distance of the IC card is slightly shorter. If you use a keychain-type proximity card,the reading distance will be shorter, generally 1-3 cm. The way to read the card, it is recommended to use the card to face the card and naturally approach it, and the card reading method of using the card to quickly swipe from the side is not advisable, and the success of the card swipe is not guaranteed.
2.The card reader is installed on a metal surface. Since the card reader is a radio frequency product, the metal pair near the front or the rear will absorb its radio frequency signal. If the metal surface is large, it will even affect the card reader. card, or the reading distance is very attenuated.
3.The distance between the two card readers will also affect the card reader, some will shorten the card reading distance, and some will cause the two card readers to read the card at the same time or the card reader cannot read the card.
Solution: try not to install it on a metal plane, or dig out the back of the card reader against the metal part, and keep the distance between the two card readers more than 25cm.
ProductSiteLaunchDate : 2023-08-25T03:52:11.762Z
Style : RS232
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 43202000
WarrantyDescription : Limited Lifetime Warranty Covers Manufacturer Defects