Cart 2 india

Specification
Brand : Sysrox
BulletPoint1 : ✏️SYSROX HIGH-PRECISION MAGNETOMETER allowing for 3-axis measurement of magnetic fields enabling precise heading measurement with 0.5° accuracy, ideal for use as a compass. Measurement frequency up to 1000Hz, measurement range of ±8 Gauss with an 18-bit ADC.
BulletPoint2 : ✏️NEXT-GENERATION SENSOR (MMC5983MA) HIGH PERFORMANCE replacing older models such as QMC5883L, HMC5883L, LIS3MDL, with unparalleled resolution, precision, and noise levels for this range of sensors.
BulletPoint3 : ✏️FULLY CUSTOMIZABLE SOFTWARE for reading, configuring, and calibrating the sensor using SPI bus, compatible with Arduino, perfect for ESP32 or Teensy 4.
BulletPoint4 : ✏️MINIATURE DEVELOPMENT BOARD 1cm x 1cm with 2.54mm pin spacing for easy prototyping of robotic applications, drones... Snap-on prototyping pins allow for use on a breadboard or non-permanent mounting on a support board.
BulletPoint5 : ✏️ONLINE COMPREHENSIVE DOCUMENTATION enabling easy utilization of the board and extension of the offered functionalities.
ExternallyAssignedProductIdentifier : 3760406260046
ExternallyAssignedProductIdentifier1 : 0701715497702
ExternallyAssignedProductIdentifier2 : 701715497702
IncludedComponents : Breakout board, Snappable pins (males + females), Straight pins, Antistatic bag
ItemName : Sysrox MMC5983MA 3-axis Magnetometer High-Performance Compass 0.5° Precise Heading Measurement SPI Communication for Arduino or Raspberry
ItemPackageDimensions_Height : 0.4 centimeters
ItemPackageDimensions_Length : 9 centimeters
ItemPackageDimensions_Width : 6 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : acceleration-sensors
Manufacturer : Sysrox
Material : Copper
MaximumSupplyVoltage : 5 volts
MeasurementAccuracy : 0.5 degrees
MeasuringRange : ±8 Gauss
ModelNumber : SRX-MAG00-DEV
MountingType : Flange Mount
NumberOfItems : 1
OutputType : Digital
PartNumber : SRX-MAG00-DEV
ProcessorCount : 1
ProductDescription :

The SRX-MAG00-DEV is a high-performance magnetometer that can be used as a basis for a heading measurement system.

It includes:

A magnetometer: Memsic MMC5983MA

... in the form of a miniature development board perfect for the development and prototyping of robotic applications.

Paired with the included C++ library, it allows for magnetic field measurements with unmatched precision and noise level for this range of sensors, enabling accurate heading calculation to 0.5°.

Included Software

A comprehensive and customizable software is included, allowing for quick utilization of the board.

✅ It can be deployed on ESP32-S3 immediately.

✅ Full reading and sensor configuration are available on any microcontroller with the Arduino framework.

✅ Magnetometer calibration tools are also included.

⚠️ The proposed board only includes the sensors and no microcontroller, which must be added separately and connected to the board to benefit from the listed features.

Comprehensive Documentation

Easily expand the capabilities of your application with comprehensive and regularly updated documentation.

Board Specifications

✏️ Dimensions: 10.5mm x 10.5mm x 1.6mm

✏️ Power supply: 3.3V

✏️ Interfaces: SPI, I2C (pull-up resistors not included).

Raw Sensor Performance (default software settings)

These measurements were taken with the provided software and default sensor reading parameters. For more information on the capabilities of each sensor, please refer to the supplier datasheet.

 

 

 

✔️ Magnetometer (MMC5983MA)

Range: ……………………………………….... ±8 Gauss

Noise (RMS): …………………………………. 0.6 mGauss

Resolution: …………………………………… 0.061 mGauss

Heading Precision (after calibration): .. 0.5°

Polling Frequency: …………………………. 100 Hz

Bandwidth (-3dB): ………………………….. 50 Hz

ProductSiteLaunchDate : 2024-03-31T15:40:15.392Z
SpecificUsesForProduct : [INF] Inferred: robotic applications, drones, projects requiring precise magnetic field measurements
Style : Modern
SupplierDeclaredDgHzRegulation : not_applicable
WarrantyDescription : 1