Cart 2 india

Specification
Brand : JESSINIE
BulletPoint1 : 【Advanced Motion Sensing】The MPU-6050 features the world's first 9-axis motion processing sensor, integrating a 3-axis gyroscope, a 3-axis accelerometer, and an expandable Digital Motion Processor (DMP) for comprehensive motion tracking. for robotics, drones, and motion capture applications.
BulletPoint2 : 【Versatile Connectivity】Easily connect to both inertial and non-inertial digital sensors via I2C or SPI interfaces. The device supports third-party sensors like magnetometers and pressure sensors, offering flexible integration for various projects.
BulletPoint3 : 【User-Controlled Measurement Ranges】Customize the sensor's measurement ranges to suit your applications. The gyroscope ranges include 250, 500, 1000, and 2000°/s, while the accelerometer supports 2, 4, 8, and 16g. for both fast and slow-motion tracking.
BulletPoint4 : 【Efficient Power Management】On-chip 1024-byte FIFO and embedded temperature sensor reduce system power consumption and ensure accurate measurements under different conditions. Operates efficiently within a DC 3~5V voltage range.
BulletPoint5 : 【Easy Integration & Communication】Comes with clear pin descriptions for straightforward integration. Features a 400kHz I2C and 1MHz SPI interface for standard communication, and a high-speed 20MHz SPI for faster data transfers. Ensure operation in your embedded system projects.
CurrentRating : 0.1 milliamps
IncludedComponents : 9-Axis Motion Sensor
ItemName : JESSINIE 3 Pcs MPU-6050 9-Axis Motion Sensor, 3 Axis Gyroscope & 3 Axis Accelerometer, I2C/SPI Interface 16-bit ADCs Embedded DMP Temperature Sensor DC 3-5V
ItemPackageDimensions_Height : 0.8 centimeters
ItemPackageDimensions_Length : 10 centimeters
ItemPackageDimensions_Width : 5 centimeters
ItemTypeKeyword : acceleration-sensors
LowerTemperatureRating : 1 degrees_celsius
Manufacturer : JESSINIE
Material : Plastic
MaximumSupplyVoltage : 5 volts_of_direct_current
ModelName : Acouto43npggxwiy
ModelNumber : Acouto43npggxwiy
NumberOfItems : 3
PartNumber : MPU-6050
ProductDescription :
Instructions for use:
Users need to be aware that the 12C device address is determined by the ADD pin

The MPU-60X0 is the 9-axis motion processing sensor.

It integrates a 3-axis MEMS gyroscope, a 3-axis MEMS accelerometer, and an expandable Digital MotionProcessor (DMP) that can be used to connect to a third-party digital sensor, such as a magnetometer, via its 12C interface.

The MPU-60X0 can also connect to non-inertial digital sensors such as pressure sensors via its I2C interface.

The MPU-60X0 uses three 16-bit ADCs for gyroscopes and accelerometers to convert their analogue measurements into digital outputs.

An on-chip 1024-byte FIFO helps reduce system power consumption. Communication with all device registers is via a 400kHz I2C interface or a 1MHz SPI interface (SPI is only available for the MPU-6000.).

For applications requiring high-speed transfers, 20MHz SPI is available for register reads and interrupts.

In addition, there is an embedded temperature sensor and an oscillator that varies by only 1% under operating conditions.

Operating Voltage: DC 3~5V Communication Interface: 12C/SPI Gyroscope Measurable Range: 250, 500, 1000, 2000°/s Accelerometer Measurable Range: 2, 4, 8, ±16g


Pin Description
VCC: Power Positive
GND: Ground
SCL: 12C serial clock line/SPI serial clock port SDA: I2C serial data line/SPI serial data input XDA: host data port for connecting other 12C devices
XCL:Provide master clock to 12C devices
AD0:12C device address selection bit/SPI serial data output
INT:Interrupt pin
 
ProductSiteLaunchDate : 2024-08-02T06:14:55.218Z
ResponseTime : 0.1 milliseconds
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UpperTemperatureRating : 85 degrees_celsius
Voltage : 5 volts_of_direct_current
Wattage : 0.1 watts