Cart 2 india

Specification
Brand : POCREATION
BulletPoint1 : [Half bridge Strain Gauge]: The sensor is designed with a set of half bridge strain gauges, allowing for three different usage modes. Ensure maximum flexibility and compatibility for your projects.,HX711 Weighting Sensor
BulletPoint2 : Manufacturing: The input circuit can be configured as a bridge sensor, providing a bridge pressure (such as pressure, weighing) sensor mode, making it an ideal high-precision, low-cost sampling front-end module,HX711 Module
BulletPoint3 : Two analog channel inputs with integrated 128x gain programmable amplifier. Package List: 4 * Weighting Sensor; 1 * HX711 Module,50kg Weighting Sensor
BulletPoint4 : The input circuit can be configured into bridge sensor which provide bridge pressure(eg, pressure, weighing) sensor modes, making it an ideal high-accuracy, low-cost sampling front-end module.,HX711 Module Amplifier
BulletPoint5 : [Versatile Bridge Sensor]: The input circuit can be configured into a bridge sensor, making it suitable for bridge pressure, weighing, and other sensor modes. The ideal choice for high accuracy, low cost sampling requirements.,HX711
IncludedComponents : No
ItemName : 4 Pcs HX711 Module Half Bridge Strain Gauge Weighting Sensor Set for Personal Digital Scale, HX711 Weighting Sensor HX711 Module for Personal Digital Scale, 50Kg Borescopes
ItemPackageDimensions_Height : 2 centimeters
ItemPackageDimensions_Length : 12 centimeters
ItemPackageDimensions_Width : 9 centimeters
ItemTypeKeyword : acceleration-sensors
Manufacturer : POCREATION
Material : rubber
ModelName : Generic08emsgy1o7
ModelNumber : POCREATIONhew05f9odb
NumberOfItems : 1
PartNumber : POCREATIONhew05f9odb
ProductDescription :
Specification:
Sensor Size:34*34mm/1.34*1.34in
Sensor Inner Construction: 1000ohm half bridge strain gauge
Measuring Range: 50kg/100kg/200kg
Package List:
4 * Weighting Sensor
1 * HX711 Module
Users Manual:
When measuring, the outer side is correctly applied with external force. The strain beam part of the E shaped sensor (that is, the beam arm with the white rubber in the middle of the strain gauge) and the outer side are to form a shearing force in the opposite direction, that is, the middle of the strain beam must be able to undergo bending changes under stress, and there should be no obstruction on the other side of the strain beam.
Inside the sensor is a set of half bridge strain gauges, which can be used in the following three ways:
1. Use one sensor with external resistor to form a full bridge measurement. The range is one sensor's range: 50kg. Requires higher demands of outer resistor.
2. Use two sensors to form a full bridge measurement. The range is the sum of the ranges of the two sensors: 50kgx2=100kg.
3. Using four sensors to form a full bridge measurement, the range is the sum of the ranges of four sensors: 50kgx4=200kg


Note:
Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.



ProductSiteLaunchDate : 2024-05-28T09:29:55.054Z