Cart 2 india

Specification
Brand : Josbuynls
BulletPoint1 : ⚙️Aluminum alloy shell, solid and reliable. Compact structure and compact shape. Stable performance.
BulletPoint2 : ⚙️The installation can be horizontal and vertical installation should be selected according to different models.For horizontal installation, it is recommended to install the switch horizontally downward at an angle of 15-20℃ to reduce the influence of materials.
BulletPoint3 : ⚙️The switch should not be installed close to the feed opening to reduce blade damage and misuse.If the switch must be installed near the feed opening, a wide protective baffle should be installed 200 mm above the switch.
BulletPoint4 : ⚙️When the shaft length adjustable switch is disassembled in the field and the universal joint is connected to the drive shaft, the locking nut must be coated with glue and then locked with a wrench.The inlet port of the junction box must face downward and the fixing nut of the electric switch must be locked tight.
BulletPoint5 : ⚙️If you have any problems with your purchase, don't worry about the pre-sales and after-sales issues, we will do our best to solve them for you.
ExternallyAssignedProductIdentifier1 : 0796713499513
ExternallyAssignedProductIdentifier2 : 796713499513
IncludedComponents : 1×Switch
ItemName : 24V Material Level Switch,Rotary Paddle Level Sensor Level Switch High Temperature Resistance Threaded Type
ItemTypeKeyword : acceleration-sensors
Manufacturer : Josbuynls
Material : Copper
ModelNumber : Josbuynls
MountingType : Flange Mount
NumberOfItems : 1
PartNumber : Josbuynls
ProductDescription :

Specification

Voltage: 24V

Power: 4W

Blade speed: 1r.p.m

Measuring torque: 1.0 Nm

Working temperature: - 20 ~ 80 ℃

Applicable specific gravity: 0.5g/cm³

Note

For horizontal installation, it is recommended to install the switch horizontally and downward at an angle of 15-20 ℃ to reduce the impact of materials.

The wire inlet of the junction box must face down, and the fixing nut of the electric bolt must be locked.

Confirm that the voltage used is correct during power transmission.

The load of the controlled line must match with the switch contact plate#

The bridge breaker or vibration motor should be avoided near the product installation,.

The switch should not be installed close to the feed inlet to reduce blade damage and misoperation.  If the switch must be installed near the feed inlet, a 2 "wide protective baffle should be installed 200 mm above the switch.

Horizontal installation and vertical installation shall be selected according to different models.

When the shaft length adjustable type switch is disassembled and installed on site, when the universal joint is connected with the transmission shaft, the locking nut must be coated with glue, and then locked with a wrench.

The warning of "open the cover after cutting off the power supply" must be followed in the field installation.

There shall be no toxic gas corrosive to aluminum alloy at the installation site.

The maximum temperature of the tested medium shall not exceed the temperature indicated in the product label.

Due to the different display and different light, the picture may not reflect the actual color of the item.  Thanks for your understanding.

Package Included

1×Switch

ProductSiteLaunchDate : 2024-04-11T07:31:39.341Z
SupplierDeclaredDgHzRegulation : not_applicable