Cart 2 india

Specification
Brand : AITIAO
BulletPoint1 : 【MPU9250 9-Axis Sensor】Main Chip：MPU-9250, MPU-9250 Sensor module( 3 axis accelerator, 3 axis gyro and 3 axis magnetometer)
BulletPoint2 : 【Exquisite Quality】The MPU-9250 9-axis sensor module features the immersion gold PCB, the MPU-9250 integrates a 3-axis magnetometer AK8963, The 16-bit AD converter is embedded in the chip, with 16-bit data output
BulletPoint3 : 【Power Supply】3-5V (internal low dropout voltage regulator); Communication: standard IIC communication protocol
BulletPoint4 : 【Compatible】GY-9250 Gyroscope Acceleration Magnetic Sensor Perfect for all models of Raspberry Pi, ESP 32 and various microcontrollers.
BulletPoint5 : 【Pre-soldered】Solderless! Pins are already attached. Ready to plug in and go, no dangerous and save time.
ExternallyAssignedProductIdentifier1 : 0687117727930
ExternallyAssignedProductIdentifier2 : 687117727930
IncludedComponents : MPU9250 GY-9250 module
ItemName : 1PCS Pre-Soldered MPU9250 GY-9250 9-Axis 9 DOF 16 Bit Gyroscope Acceleration Magnetic Sensor 9-Axis Attitude +Gyro+Accelerator+Magnetometer Sensor Module IIC/SPI Compatible with Raspberry Pi ESP32
ItemPackageDimensions_Height : 7 centimeters
ItemPackageDimensions_Length : 0.6 centimeters
ItemPackageDimensions_Width : 5.2 centimeters
ItemTypeKeyword : acceleration-sensors
Manufacturer : AITIAO
Material : Copper
ModelNumber : GY-9250-1PCS
NumberOfItems : 1
PartNumber : GY-9250-1PCS
ProductDescription :

AITIAO MPU9250 GY-9250 9-Axis 9 DOF 16 Bit Gyroscope Acceleration Magnetic Sensor 9-Axis Attitude +Gyro+Accelerator+Magnetometer Sensor Module IIC/SPI

Features:

• This module integrates gyroscope, accelerometer and magnetometer into a single QFN package.
• The 9-axis sensor module features the immersion gold PCB, which uses the machine connecting process to make it work fine.
• Compared to previous generation, the MPU-9250 has its size smaller and its sensitivity improved to 0.15 μT/ LSB.

Specifications:

• Module model: GY-9250
• Chip: MPU-9250
• Acceleration range: ±2 ±4 ±8 ±16 g
• Sensitivity: up to 16,384 LSB/g
• Gyroscope range: ±250 500 1000 2000 °/s
• Sensitivity: up to 131 LSB/deg/sec
• Magnetic Field Range: ± 4800 μT
• Supply Voltage: 4.4 to 6.5 V or 3.3V if you connect the jumper near the on-board voltage regulator
• Interface: I2C
• 2C Address: 0x68 by default, 0x69 if AD0 is pulled high
• Module size: approx. 15 x 25 mm/ 0.59 x 0.98 inch 
• Pin spacing: approx. 2.54 mm/ 0.1 inch
• On-board pull-up resistors on SDA, SCL, and nCS
• On-board pull-down resistors on FSYNC and AD0

TIPS: This MPU9250 GY-9250 module is ready to be plugged in. No soldering is needed. No dangerous and save time.

Package Included：

• 1PCS MPU9250 9-Axis 9 DOF 16 Bit Gyroscope Acceleration Magnetic Sensor

ProductSiteLaunchDate : 2024-04-11T06:44:34.927Z
SupplierDeclaredDgHzRegulation : not_applicable