Cart 2 india

Specification
Brand : Mavaol
BulletPoint : Aladdin Spindle Oil
BulletPoint1 : High Efficiency & Quick Printing: Optimized fluidity for faster printing speeds and higher success rates, ensuring your are completed with strength and Accuracy to withstand accidental drops.
BulletPoint2 : Minimal Odor & Easy Cleanup: Experience easy 3D printing with a resin that emits minimal smell and can be cleaned easily with air or spray, preventing sticking to the pan after prints.
BulletPoint3 : Superior Glossy Finish: Achieve stunning, glossy s and high-resolution results with this -sensitive resin, suitable for detailed and smooth printed Series.
BulletPoint4 : Broad Compatibility: Ideal for DLP and LCD 3D printers, supporting up to 8K resolution and delivering excellent results for both small and medium-sized projects.
BulletPoint5 : Wide Application & Value: Versatile 1000ml capacity resin suitable for both desktop and industrial parts, making it practical for hobbyists and professionals alike.
Color : Red
ContainsLiquidContents : 1
Department : Unisex-adult
ExternallyAssignedProductIdentifier : 9360267123470
ExternallyAssignedProductIdentifier1 : 0850040765205
ExternallyAssignedProductIdentifier2 : 850040765205
GpsrSafetyAttestation : 1
Hazmat : 3
IncludedComponents : 5 Gallon Bucket
ItemForm : Liquid
ItemName : Mavaol 1000ml Resin High Efficiency Quick Printing Minimal Odor Glossy Finish 8K Resolution for DLP LCD Printers Hobbyists Professionals (Red)
ItemPackageDimensions_Height : 11 centimeters
ItemPackageDimensions_Length : 24 centimeters
ItemPackageDimensions_Width : 11 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : liquid-3d-printing-materials
LiquidVolume : 5 gallons
Manufacturer : Mavaol
Material : Paper
ModelName : Mavaolhav5rtopqi-13
ModelNumber : Mavaolhav5rtopqi-13
NumberOfBoxes : 1
NumberOfItems : 1
PaperFinish : matte
PartNumber : Mavaolhav5rtopqi-13
ProductDescription :
Item Type: 3D Printing Resin
Capacity: 1000ml
Applicable Light Source Wavelength: 365-405nm
Underlayer Exposure Time: 20-30S
Bottom Layers: 6 layers
Regular Exposure Time: 1.5-3S
Density: 1.10-1.12g/cm³
Viscosity: 260-350mPa·s (at 25℃)
Bending Strength: 47-50Mpa
Tensile Strength: 48-54Mpa
Hot Deformation Temperature: 85℃
Glass Transition Temperature: 100℃
Shore Hardness: 82D
Fracture Elongation: 8%-12%

Note:
1. The ambient temperature is 20-30 ℃. Do not print in the window or other environment exposed to light and try to isolate children and pregnant women.
2. Shake the resin for one to two minutes before use to prevent the components from settling.
3. It is recommended to wear nitrile gloves and protective mask when using, and keep indoor ventilation. Those who are allergic to acrylic should be cautious.
4. The liquid on the of the printed resin parts should be cleaned, and the cleaning process should not exceed 1 minute. If the cleaning time is too long, the structural performance of the resin parts will become worse.
5. Where the pores and other details are not easy to clean, ultrasonic or syringe and other auxiliary tools can be used for cleaning, and it is not advisable to clean the model too many times. The cleaning model with impure detergent will lead to whitening and unclean washing. The specific cleaning time shall be subject to the effect that there is no viscosity on the of the resin part and no resin in the pores.
6. After cleaning, drain or blow dry the detergent with a hair dryer, and place it under light or sunlight, and all parts of the model should be evenly exposed to the light, until the of the nail scraped resin parts feels dry and the hardness is enough, the resin solution on the skin can be cleaned with detergent, and try not to touch the washed resin solution with your hands.
7. If you accidentally let the resin enter your eyes
ProductSiteLaunchDate : 2025-01-28T18:17:33.982Z
RecommendedUsesForProduct : Industrial
RecommendedUsesForProduct1 : Painting
RecommendedUsesForProduct2 : Drawing
RecommendedUsesForProduct3 : Arts
RecommendedUsesForProduct4 : Crafts
RecommendedUsesForProduct5 : Doodling
SheetCount : 1
Size : Large B
SpecificUsesForProduct : Spindle Lubrication, Corrosion Prevention
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 23260000
WarrantyDescription : not