Cart 2 india

Specification
Brand : Mrisata
BulletPoint1 : The latest CH340G CNC Shielding Expansion Card version 3.0
BulletPoint2 : Adopt board for Kuman MCU for ATmega328 USB interface for ATmega16U2. with 30cm USB cable.
BulletPoint3 : with 4 DRV8825 stepper motor drivers with heat sink.
BulletPoint4 : 3 pieces of stepper motor for NEMA-17 84oz 59 cowhide 47 mm body 1.8 degree with mounting bracket kit. 3D printer CNC robot with 3 mounting brackets and 12 M3 screws.
BulletPoint5 : 3 mechanical limit switches for Endstop for 3D printer for RAMst 1.4 with 3-pin 70 cm cable.
Color : White
ItemName : Printer Accessories 3D Printer CNC Kit for 3 Shock Absorbers 3D Printer Accessories
ItemPackageDimensions_Height : 8 centimeters
ItemPackageDimensions_Length : 20 centimeters
ItemPackageDimensions_Width : 16 centimeters
ItemTypeKeyword : 3d-printer-accessories
Manufacturer : Mrisata
Material : Polylactic Acid
ModelNumber : Mrisata68q59wv1dn
NumberOfBoxes : 1
PartNumber : Mrisata68q59wv1dn
ProductDescription : printer accessories 3D Printer CNC Kit for 3 Shock Absorbers 3D Printer Accessories
Specification:
Features:
1. The latest CH340G CNC Shielding Expansion Card version 3.0.
2. Adopt board for Kuman MCU for ATmega328 USB interface for ATmega16U2. with 30cm USB cable.
3. with 4 DRV8825 stepper motor drivers with heat sink.
4. 3 pieces of stepper motor for NEMA-17 84oz 59 cowhide 47 mm body 1.8 degree with mounting bracket kit. 3D printer CNC robot with 3 mounting brackets and 12 M3 screws.
5. 3 mechanical limit switches for Endstop for 3D printer for RAMst 1.4 with 3-pin 70 cm cable.

Specifications:
for CNC guarding board:
The latest CH340G 3.0 version for
Compatible with: for GRBL 0.9
for the 4 axes X Y Z A-Can copy X Y Z or use the custom firmware with pins D12 and D13 to make the complete 4th
2 x end stops per 6 in total
Coolant release
Compatible: for A4988 or DRV8825 stepper drive
Power: 12-36V DC
Compatible: for Kuman
for DRV8825 Stepper Motor Driver: 2.5 A Maximum Current / Phase Suitable for Software and Hardware

for Nema 17 stepper motor:
Model: 17HD48002H-22B
Step angle: 1.8°
Holding torsion: 59Ncm 84 oz.in
Rated current / phase: 1.7A
Frame size: 41 x 41mm/1.61x1.61in
Body length: 47mm/1.85in
Shaft diameter: 5mm/0.2in
Shaft length: 22mm/0.87in

Mechanical limit stop connection instructions:
Red line connected to VCC slope +
Black line connected to GND slope -
Green line connects SIGNAL slope in s
Tips: Under normal circumstances the system must have at least three machines
Switch to the configuration you want.
Advantages: easy to install the most common style
Cable length: 70 cm/27.56in

Package List:
1 x CNC guarding board
1 x board for Kuman
4 x Stepper motor driver for DRV8825
4 x Aluminum cooler with 3meters
ProductSiteLaunchDate : 2024-03-17T17:13:24.875Z
Size : 20.00X20.00X5.80CM
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
WarrantyDescription : 24-hour response time