Cart 2 india

Specification
Brand : Polymaker
BulletPoint1 :
BulletPoint2 :
BulletPoint3 :
BulletPoint4 : ♻️ 【Cardboard Spool】 - Comes in upgraded 3.0 version packaging with fully recycled cardboard spool and box
BulletPoint5 : ⚙️ 【Printing Settings】 - Nozzle: 235˚C; Bed: 70˚C; Speed: 60mm/s
BulletPoint6 :
Color : 1kg Petg Translucent Red (Hex Code: #Cb333b)
ExternallyAssignedProductIdentifier : 6938936712367
ExternallyAssignedProductIdentifier1 : 194644138806
ExternallyAssignedProductIdentifier2 : 0194644138806
ItemName : Polymaker PETG Filament 1.75mm, 1kg Strong PETG 3D Printer Filament Translucent Red - PolyLite PETG Red 3D Printing Filament 1.75mm, Dimensional Accuracy +/- 0.03mm, Print with Most 3D Printers
ItemPackageDimensions_Height : 22.4 centimeters
ItemPackageDimensions_Length : 7.4 centimeters
ItemPackageDimensions_Width : 20.8 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : filament-3d-printing-materials
Manufacturer : Polymaker
Material : Polyethylene Terephthalate Glycol
ModelNumber : PB01031
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : PB01031
ProductDescription : Polymaker PolyLite PETG 3D Printer Filament 1.75mm - Light Up Your Daily Life!

PETG 1.75mm Filament Key Product Feature

• Excellent all-rounder
• Good layer adhesion
• Easy to print
• Better heat and impact resistance than PLA (also higher printing and bed temperature needed)
• Good light diffusion (Clear PETG Filament/Transparent PETG)
• Consistent color and dimensional accuracy realized with CCD line sensor technology;
• Carefully winded and dried and vacuum-sealed in a resealable ziplock bag with desiccant, no tangle or moisture issue;
• Cardboard spool and box are made of recycled materials that can be recycled directly after use, helping lessen plastic waste.

PETG 3D Printing Filament 1.75mm Printing Settings:
Nozzle: 230˚C - 240˚C;
Bed: 70˚C - 80˚C;
Speed: 30mm/s - 50mm/s;
Fan: Turn off-20% (LOW for better surface quality; OFF for better strength).
Tips: Please pass the PETG filament 1.75 through the fixed hole to avoid tangles after use.

PETG 3D Filament Specs:
Material: Polyethylene Terephthalate Glycol
N.W: 1kg/Spool
Filament Diameter: 1.75mm
Spool Type: Recycled cardboard
Dimensional Accuracy: 70% is within +/- 0.01, 97% is within +/- 0.02, 99% is within +/- 0.03, 99.9% is within +/- 0.04
ProductSiteLaunchDate : 2022-01-27T06:00:18.197Z
Size : 1.75mm
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 35.27
WarrantyDescription : a year