Specification Brand : MG Chemicals BulletPoint1 : Black PETG BulletPoint2 : 1.75 mm diameter, PETG Filament, 1 Kg (2.2 lbs) net weight BulletPoint3 : Recommended Print Temperature 210°C - 240°C (410°F - 464°F) BulletPoint4 : Vacuum Sealed With Desiccant, in resealable bags BulletPoint5 : Spool Diameter: 7.75" - Spool Width: 2.5" - Spool Hub Diameter: 3.5" - Hub Hole Diameter: 2.125" Color : Black ExternallyAssignedProductIdentifier : 5410329566845 ExternallyAssignedProductIdentifier1 : 779008277362 ExternallyAssignedProductIdentifier2 : 0779008277362 ExternallyAssignedProductIdentifier3 : 00779008277362 ItemName : MG Chemicals PETG17BK1 Black PETG 3D Printer Filament, 1.75 mm, 1 kg Spool ItemPackageDimensions_Height : 21 centimeters ItemPackageDimensions_Length : 7.2 centimeters ItemPackageDimensions_Width : 20.4 centimeters ItemPackageQuantity : 1 ItemTypeKeyword : filament-3D-printing-materials Manufacturer : MG Chemicals Material : PETG - Polyethylene terephthalate glycol-modified ModelNumber : PETG17BK1 NumberOfBoxes : 1 NumberOfItems : 1 PackageLevel : unit PartNumber : PETG17BK1 ProductDescription : Gizmo Dorks We provide the highest quality 3D printing materials such as ABS, PLA, HIPS, PVA, and more. Our filaments are run with tight tolerances. There are no air bubbles or oily residues. Every filament comes loaded on a durable, hard plastic spool, not a cheap, flimsy cardboard spool.
PLA, Polylactic Acid, is created from processing a number of plant products. PLA can be composted at commercial facilities unlike ABS which is derived from fossil fuels. PLA is a more earth friendly plastic. It is stronger and more rigid than ABS, and in general the printed objects will have a more glossy look and feel compared to ABS. Unlike ABS, PLA can be sanded and machined. PLA has a lower melting temperature compared to ABS. As a material, PLA has much less warping versus ABS. Additionally, a heated bed is not required to print it. PLA generally enjoys sharper details and corners compared to ABS without the risk of cracking or warping. PLA can also be printed at higher throughput speeds.
Compatible with RepRap, Makerbot, UP!, Lulzbot, Afinia, Solidoodle, MakerGear, Printrbot LC, and more!
FAQ? Is the spindle hole large enough to fit my Makerbot printer? Yes! Our spindle holes are large enough to fit the Makerbot printers. You don't have to worry about fabricating a spindle extension any longer. *NOTE, these spools will not fit inside of the new Makerbot 5th generation printer drawers. You can still use these spools and feed the filament directly through the top of the printer.
What other colors are available? PLA comes in a variety of different vibrant colors, 39 different options total. *New fluorescent colors are available. They glow under UV light, commonly known as black light. *New color changing filaments are available; the filaments will change colors at 31°C (88°F). The filament is one color below 31°C, and when it is heated above 31°C, the filament will change to another color. ProductSiteLaunchDate : 2015-12-01T08:00:01.000Z Size : 1 kg/3 mm StreetDate : 2015-12-22T00:00:01Z SupplierDeclaredDgHzRegulation : not_applicable UnitCount : 1 WarrantyDescription : warranty@mgchemicals