Cart 2 india

Specification
Brand : LEE FUNG
BulletPoint1 : The color of this filament has been improved.This filament has strong toughness and uniform in color
BulletPoint2 : Environmental Friendly Material - Made of TPU (Thermoplastic Polyurethane), this material is toxic-free and harmless to human
BulletPoint3 : High Purity - low shrinkage rate, can be used in priting any size of models without warping
BulletPoint4 : 1.75mm Filament Diameter (Tolerance: ± 0.05mm), recommended print temperature: 374°F - 446°F(190-230°C), Spool Diameter: 7.87inch, Spool Height: 2.83inch
BulletPoint5 : Suitable for many occasions - like factory, lab, for business use. Test Report: MSDS,FDA, ROHS,EN71-19,17PHTHALATE,REACH
Color : Red
ExternallyAssignedProductIdentifier1 : 711221152958
ExternallyAssignedProductIdentifier2 : 0711221152958
ExternallyAssignedProductIdentifier3 : 00851492006113
GpsrSafetyAttestation : 1
ItemName : LEE FUNG TPU 3D Printer Filament 1.75mm,1kg (2.2lbs) Spool, Dimensional Accuracy +/- 0.05 mm Red
ItemPackageDimensions_Height : 20.32 centimeters
ItemPackageDimensions_Length : 7.366 centimeters
ItemPackageDimensions_Width : 20.32 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : filament-3d-printing-materials
Manufacturer : LEE FUNG
Material : Thermoplastic Polyurethane
ModelNumber : A11795-TPU-R1KG
NumberOfBoxes : 1
NumberOfItems : 1
PackageLevel : unit
PartNumber : A11795-TPU-R1KG
ProductDescription : Perfect for DIY lovers to design christmas or birthday gifts to your children, families, friends, and lovers, also good for business use to design a model

SPECIFICATION:

- Filament Material: TPU (Thermoplastic Polyurethane)
- Net Weight: About 2.20 lb (1kg)
- Shipping Weight: About 2.98 lb (1.35kg)
- Filament Diameter: 1.75mm (±0.05mm)
- Recommended extruder temperature: 446°F - 480°F(230-250°C)
- Spool Type: Plastic Spool
- Spool Diameter: About 7.87 inch (20cm)
- Spool Width: About 2.28 inch (5.8cm)
- Spool Height: 2.76 inch (7cm)
- Spool Hub Hole: About 2.09 inch (5.3cm)
- Test Report: MSDS,FDA, ROHS,EN71-19,17PHTHALATE,REACH
- Package Type: Vacuum package

PRINTING TIPS:
Recommended for printers with direct drive extruder, 0.4~0.8mm Nozzles.
With bowden extruder you might pay more attention to these tips:

- Print slow 15-30 mm/s Printing speed
- First layer settings. (Height 100% Width 150% speed 50% e.g.)
- Retraction disabled. This would reduce messy, stringing or oozing printing result.
- Increase Multiplier(Optional). set to 1.1 would help the filament bond well. - Cooling fan on after first layer.
If you are having problems printing with soft filaments, firstly, and most importantly, slow the print down, run at 20mm/s will work perfectly.

It is important when loading the filament to allow it to only just start extruding. Once you see the filament coming out the nozzle hit stop. The load feature pushes filament through quicker than a normal print and this can cause it to get caught in the extruder gear.

Also feed the filament direct to the extruder, not through the feeder tube. This reduces the drag on the filament which can cause the gear to slip on the filament.
ProductSiteLaunchDate : 2018-02-02T09:47:16.860Z
ShipsGlobally : 1
StreetDate : 2018-03-22T00:00:01Z
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 31150000